RE: (usr-tc) HiPer DSP MultiSpan cards
Out of curiosity, what is the price for the new QUAD PRI cards? Thanks John Verreault AEI Internet -----Original Message----- From: Ronald Kushner [mailto:ron@glis.net] Sent: Friday, February 09, 2001 12:14 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) HiPer DSP MultiSpan cards Alan Martin wrote:
Ron,
Out of curiosity are you planning on putting this in a 1000 Chassis? Is this the 96 port card?
Yes, I'm putting it into a two year old chassis. It's the four PRI card. I am under the impression they have a new HiPer ARC router with a faster processor and 256MB of RAM, but my older ARCs will work according to the salespeople I've talked to. I'm just wondering if anyone else on the list has purchased these cards? I'd love to fill the few remaining slots I have in a 130A chassis with higher density cards. -Ron GLISnet, Inc 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Out of curiosity, what is the price for the new QUAD PRI cards?
I have a 3COM price sheet in front of me. These are LIST PRICES, but you can then figure out what you normally get for a discount. I would guess that 35% is probably a normal discount. Total Control Bundle w/4 PRI card, ARCII, NMC II, Dual 130A $38,900 4 PRI card alone w/NAC 20,550.00 w/o NAC 19,550.00 (for use with DS3 ingress card) DS3 Ingress Card alone 13,675.00 ------------------------------------------------------------------------- | Curtis V. Shambeau | curt.shambeau@voyager.net | Sr Vice President | | CoreComm, LTD, formerly Voyager.net and ExecPC - Wisconsin Office | | "Those who can't laugh at themselves leave the job to others" | ------------------------------------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
You might try Source Technology for quotes. Last quad (with NAC) was about $15K I believe. Normally go through Jonathan OBrien, 888 765 5758 ext2266, jobrien@source-t.com, www.source-t.com Not affiliated in any way to them nor do I receive any compensation for this plug...just a very satisfied customer. Walt ----------------------------------------------- Walter N. Gnann ISLC, President wgnann@islc.net http://www.islc.net 843.770.1000 fax: 843.770.1002 ----------------------------------------------- ----- Original Message ----- From: "Verreault, John" <verreaul@aei.ca> To: <usr-tc@lists.xmission.com> Sent: Tuesday, February 13, 2001 4:19 PM Subject: RE: (usr-tc) HiPer DSP MultiSpan cards
Out of curiosity, what is the price for the new QUAD PRI cards?
Thanks John Verreault AEI Internet
-----Original Message----- From: Ronald Kushner [mailto:ron@glis.net] Sent: Friday, February 09, 2001 12:14 AM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) HiPer DSP MultiSpan cards
Alan Martin wrote:
Ron,
Out of curiosity are you planning on putting this in a 1000 Chassis? Is this the 96 port card?
Yes, I'm putting it into a two year old chassis. It's the four PRI card.
I am under the impression they have a new HiPer ARC router with a faster processor and 256MB of RAM, but my older ARCs will work according to the salespeople I've talked to.
I'm just wondering if anyone else on the list has purchased these cards? I'd love to fill the few remaining slots I have in a 130A chassis with higher density cards.
-Ron GLISnet, Inc 810/939.9885
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (3)
-
Curt Shambeau -
Verreault, John -
Walt Gnann