At 11:18 AM 3/1/01 -0300, you wrote:

Humm.. okss.. hey thankss..... Let me try explain what i need..

I need do each modem in Tcontrol have the own fixed ip. Like interface mod:1 ip xxx.xxx.xxx.1 interface mod:2 ip xxx.xxx.xxx.2 ........... .......... ......... interface mod:16 ip xxx.xxx.xxx.16

Not each user have the own ip.

My situation is, i have 100+ users in radius.. others RAS and 2 TC analog. but dont have one continuous pool of ips to setup in this TC's .. at now in test is working in ip pools to modems, but i need do each modem work in specific ip.. I hope that now my situation is more "Clear"..... in ras i know how do thiss.., but in analog tcontrol nooo.. sometimee.. in any place of the net, i find a guy using this TC V.34 and the modems in fixed ips mode.. but i lost how do thiss..

Thanks again...

-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Charles Sprickman Sent: Monday, February 26, 2001 3:39 AM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) TC NetServer v34 analog

Hi,

If you already have Radius up and running, just add an IP in the "users" file:

--- someuser Auth-Type = System Service-Type = Framed-User, Framed-Protocol = PPP, Framed-Netmask = 255.255.255.255, Framed-IP-Address = 10.10.10.193, Session-Timeout = 0, Idle-Timeout = 64000 -----

Auth-Type = System means to pull the info from your system password file. The rest just lets you set more paramaters... This isn't really USR/3Com specific...

Charles

| Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork@inch.com | access@inch.com

On Mon, 26 Feb 2001 list@angelnet.com.br wrote:

...

Heii Helloo.. Ho yea.. the TC is working fine i have the manual ( idowloaded from 3com sitee ), but in manual only speak how set fixed ips to use with the internal user tables ( well, if i read all manuals ok and undestand . heeh).. Now my TC is working in a pool ip modes.. without problems ( well only the standart problems of this TC )... Hamm, sorry iam using the Radius .. and yeahh i have one teminal cable .. Pleasee can you help me?

-----Original Message----- From: albert [mailto:emmanuel@mwt.net] Sent: Monday, February 26, 2001 1:36 AM To: list@angelnet.com.br Subject: RE: (usr-tc) TC NetServer v34 analog

Hello,...

first may i ask if you have a set of manuals for the unit? and a USR consol cable?

albert

...

-----Original Message----- From: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of list@angelnet.com.br Sent: Monday, February 26, 2001 10:15 AM To: usr-tc@xmission.com Subject: (usr-tc) TC NetServer v34 analog

Hello Peoples?? Well sorry if my question is out of this list, but i need some help, and 3com dont help me.. NEVER ... Well i need ( if possible ) configure my Total Control Netserver V.34 Analog to use with fixed IP's ...... Pleaseeee someone help mee... is urgentt...... My ICQ 14484847 WEGA

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.