Hi, Looking for someone with good knowledge of Netserver-era TC stuff... I have an old 45A chassis with an NMC, Netserver PRI, and 6 "Quad Analog" cards (hw rev. 0.2.0 and 2.0.0) with analog NICs. These modems all show up as "AIP" on the Netserver. If I stick in a newer Quad Digital card in the chassis, it comes up fine as "ARP", but it's kind of useless, since it can't talk to an analog NIC. I don't go back that far, the oldest card I ever saw was a Quad Analog/Digital. Is there a chance that these analog cards were not made to work with the Netserver? I can talk to them on the DTE ports on the analog nics, so they work, but I don't see a way to tell them NOT to talk to the DTE ports but to use the packet bus. Someone also mentioned that they may talk to a Netserver, but NOT a Netserver PRI. Any truth in that? I just don't know about stuff that old, and any docs for this stuff are long gone from the Commworks site it seems. Thanks, Charles -- Charles Sprickman spork@inch.com
The Quad Analog modem will not work with the NETServer, it was never designed to work. -V ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Friday, July 05, 2002 6:00 PM Subject: [USR-TC] Help with OLD gear
Hi,
Looking for someone with good knowledge of Netserver-era TC stuff...
I have an old 45A chassis with an NMC, Netserver PRI, and 6 "Quad Analog" cards (hw rev. 0.2.0 and 2.0.0) with analog NICs. These modems all show up as "AIP" on the Netserver. If I stick in a newer Quad Digital card in the chassis, it comes up fine as "ARP", but it's kind of useless, since it can't talk to an analog NIC.
I don't go back that far, the oldest card I ever saw was a Quad Analog/Digital. Is there a chance that these analog cards were not made to work with the Netserver? I can talk to them on the DTE ports on the analog nics, so they work, but I don't see a way to tell them NOT to talk to the DTE ports but to use the packet bus. Someone also mentioned that they may talk to a Netserver, but NOT a Netserver PRI. Any truth in that? I just don't know about stuff that old, and any docs for this stuff are long gone from the Commworks site it seems.
Thanks,
Charles
-- Charles Sprickman spork@inch.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
I am not sure what you are referring to . I have a lot quad modems working with old netservers. The question is weather the quad digital will work with a NIC or or not and I have been told they do not. You need to use the Analog/digital Quads if you are going to use the NIC. TK ----- Original Message ----- From: "V" <ved@iyka.com> To: <usr-tc@mailman.xmission.com> Sent: Friday, July 05, 2002 4:49 PM Subject: Re: [USR-TC] Help with OLD gear
The Quad Analog modem will not work with the NETServer, it was never designed to work.
-V ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Friday, July 05, 2002 6:00 PM Subject: [USR-TC] Help with OLD gear
Hi,
Looking for someone with good knowledge of Netserver-era TC stuff...
I have an old 45A chassis with an NMC, Netserver PRI, and 6 "Quad Analog" cards (hw rev. 0.2.0 and 2.0.0) with analog NICs. These modems all show up as "AIP" on the Netserver. If I stick in a newer Quad Digital card in the chassis, it comes up fine as "ARP", but it's kind of useless, since it can't talk to an analog NIC.
I don't go back that far, the oldest card I ever saw was a Quad Analog/Digital. Is there a chance that these analog cards were not made to work with the Netserver? I can talk to them on the DTE ports on the analog nics, so they work, but I don't see a way to tell them NOT to talk to the DTE ports but to use the packet bus. Someone also mentioned that they may talk to a Netserver, but NOT a Netserver PRI. Any truth in that? I just don't know about stuff that old, and any docs for this stuff are long gone from the Commworks site it seems.
Thanks,
Charles
-- Charles Sprickman spork@inch.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Sorry about that last post. Misread the original. 3rd card called the analog only. I was referrring to the analog/digital cards. ----- Original Message ----- From: "V" <ved@iyka.com> To: <usr-tc@mailman.xmission.com> Sent: Friday, July 05, 2002 4:49 PM Subject: Re: [USR-TC] Help with OLD gear
The Quad Analog modem will not work with the NETServer, it was never designed to work.
-V ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Friday, July 05, 2002 6:00 PM Subject: [USR-TC] Help with OLD gear
Hi,
Looking for someone with good knowledge of Netserver-era TC stuff...
I have an old 45A chassis with an NMC, Netserver PRI, and 6 "Quad Analog" cards (hw rev. 0.2.0 and 2.0.0) with analog NICs. These modems all show up as "AIP" on the Netserver. If I stick in a newer Quad Digital card in the chassis, it comes up fine as "ARP", but it's kind of useless, since it can't talk to an analog NIC.
I don't go back that far, the oldest card I ever saw was a Quad Analog/Digital. Is there a chance that these analog cards were not made to work with the Netserver? I can talk to them on the DTE ports on the analog nics, so they work, but I don't see a way to tell them NOT to talk to the DTE ports but to use the packet bus. Someone also mentioned that they may talk to a Netserver, but NOT a Netserver PRI. Any truth in that? I just don't know about stuff that old, and any docs for this stuff are long gone from the Commworks site it seems.
Thanks,
Charles
-- Charles Sprickman spork@inch.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
True Dat: Quad Analog - no netserver/arc (works well with Livingston PM25's and 30's) Quad Analog/Digital - yes netserver/arc Quad Digital - yes netserver/arc Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Terry Kennedy" <terry@olypen.com> To: <usr-tc@mailman.xmission.com> Sent: Saturday, July 06, 2002 11:00 AM Subject: Re: [USR-TC] Help with OLD gear
Sorry about that last post. Misread the original. 3rd card called the analog only. I was referrring to the analog/digital cards. ----- Original Message ----- From: "V" <ved@iyka.com> To: <usr-tc@mailman.xmission.com> Sent: Friday, July 05, 2002 4:49 PM Subject: Re: [USR-TC] Help with OLD gear
The Quad Analog modem will not work with the NETServer, it was never designed to work.
-V ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Friday, July 05, 2002 6:00 PM Subject: [USR-TC] Help with OLD gear
Hi,
Looking for someone with good knowledge of Netserver-era TC stuff...
I have an old 45A chassis with an NMC, Netserver PRI, and 6 "Quad Analog" cards (hw rev. 0.2.0 and 2.0.0) with analog NICs. These modems all show up as "AIP" on the Netserver. If I stick in a newer Quad Digital card in the chassis, it comes up fine as "ARP", but it's kind of useless, since it can't talk to an analog NIC.
I don't go back that far, the oldest card I ever saw was a Quad Analog/Digital. Is there a chance that these analog cards were not made to work with the Netserver? I can talk to them on the DTE ports on the analog nics, so they work, but I don't see a way to tell them NOT to talk to the DTE ports but to use the packet bus. Someone also mentioned that they may talk to a Netserver, but NOT a Netserver PRI. Any truth in that? I just don't know about stuff that old, and any docs for this stuff are long gone from the Commworks site it seems.
Thanks,
Charles
-- Charles Sprickman spork@inch.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Thanks again to all! It's good to see this list coming alive again... Charles -- Charles Sprickman spork@inch.com On Sat, 6 Jul 2002, Marshall Morgan wrote:
True Dat:
Quad Analog - no netserver/arc (works well with Livingston PM25's and 30's) Quad Analog/Digital - yes netserver/arc Quad Digital - yes netserver/arc
Marshall Morgan
Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com
601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Terry Kennedy" <terry@olypen.com> To: <usr-tc@mailman.xmission.com> Sent: Saturday, July 06, 2002 11:00 AM Subject: Re: [USR-TC] Help with OLD gear
Sorry about that last post. Misread the original. 3rd card called the analog only. I was referrring to the analog/digital cards. ----- Original Message ----- From: "V" <ved@iyka.com> To: <usr-tc@mailman.xmission.com> Sent: Friday, July 05, 2002 4:49 PM Subject: Re: [USR-TC] Help with OLD gear
The Quad Analog modem will not work with the NETServer, it was never designed to work.
-V ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Friday, July 05, 2002 6:00 PM Subject: [USR-TC] Help with OLD gear
Hi,
Looking for someone with good knowledge of Netserver-era TC stuff...
I have an old 45A chassis with an NMC, Netserver PRI, and 6 "Quad Analog" cards (hw rev. 0.2.0 and 2.0.0) with analog NICs. These modems all show up as "AIP" on the Netserver. If I stick in a newer Quad Digital card in the chassis, it comes up fine as "ARP", but it's kind of useless, since it can't talk to an analog NIC.
I don't go back that far, the oldest card I ever saw was a Quad Analog/Digital. Is there a chance that these analog cards were not made to work with the Netserver? I can talk to them on the DTE ports on the analog nics, so they work, but I don't see a way to tell them NOT to talk to the DTE ports but to use the packet bus. Someone also mentioned that they may talk to a Netserver, but NOT a Netserver PRI. Any truth in that? I just don't know about stuff that old, and any docs for this stuff are long gone from the Commworks site it seems.
Thanks,
Charles
-- Charles Sprickman spork@inch.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (4)
-
Charles Sprickman -
Marshall Morgan -
Terry Kennedy -
V