The version you should run is largely dependent on the memory configuration and generation of each card within the chassis. If HiperARC is 128/16 and chassis is all Hiper, V.92 code can be used. Remember that TCM does not support TCS 4.7, should you choose to upgrade. If any non-Hiper cards in chassis, TCS 4.3 should be used. Although you can upgrade the HiperDSPs to TCS 4.5/4.7 for increased bugfixes, as long as you don't enable V.92/V.44 features. http://support.utstar.com/Matrixs/TCSMatrix.cfm -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Geoffrey Deasey Sent: Wednesday, February 16, 2005 9:17 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] 3COM settings What version of code is recommended on a chassis with: 2 70A power supplys 1 HyperArc 7 HyperDSP 1 NMC (some have HyperNMC;s) Every day a different pri has errors, the only thing that seems to clear it is to pop the card out and re-insert. Thanks Geoffrey Deasey VP Systems Netpath, Inc. (336) 226-0425 www.netpath.net Alvarion certified wireless network engineer _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc