yes, but since the IP address is part of the config, I'm guessing that it will blow that out and I'll lose access to it. But what the heck - I'm going to give it a try. -----Original Message----- From: Jim McCay [mailto:jmccay@adsnet.com] Sent: Thursday, January 30, 2003 7:06 PM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] Hiper ARC Question I'm new to the hiper arc's but won't the delete config command work? jim Joel - Fox Computers wrote:
For those of you familiar with the Hiper ARC's -
Is there any way you know of to completely erase the configuration from a telnet prompt? I want to do the equivelant of choosing option 13 from the bootup menu except I want to be able to do from Telnet - I want to be able to do a complete reconfig of a HiperARC remotely. Any suggestions?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
ya you are right it will blow out the ip too, but if you want to reset EVERYTHING, that's the only way I know. Then you'll have to connect back up through the console port to run quick setup again. Sorry, jim Joel - Fox Computers wrote:
yes, but since the IP address is part of the config, I'm guessing that it will blow that out and I'll lose access to it. But what the heck - I'm going to give it a try.
-----Original Message----- From: Jim McCay [mailto:jmccay@adsnet.com] Sent: Thursday, January 30, 2003 7:06 PM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] Hiper ARC Question
I'm new to the hiper arc's but won't the delete config command work?
jim
Joel - Fox Computers wrote:
For those of you familiar with the Hiper ARC's -
Is there any way you know of to completely erase the configuration from a telnet prompt? I want to do the equivelant of choosing option 13 from the bootup menu except I want to be able to do from Telnet - I want to be able to do a complete reconfig of a HiperARC remotely. Any suggestions?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (2)
-
Jim McCay -
Joel - Fox Computers