Digital/Analog Quad Card w/Daughter no analog?
Hello all, I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue. My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm. What am I missing?
You can do this if your card is Analog or Analog-Digital. Dev wrote:
Hello all,
I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue.
My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm
The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm.
What am I missing?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
I apologize for my ignorance but what do I need to do to ensure that it is Analog-Digital? Is that the Nic or the Nac? At 09:32 AM 12/9/2003, you wrote:
You can do this if your card is Analog or Analog-Digital.
Dev wrote:
Hello all,
I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue.
My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm
The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm.
What am I missing?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Look on the front of the card, it will say Quad Analog/Digital on it. Shannan Young sky1@airmail.net Southwest Data Technology, Inc. 401 S. Sherman Street Suite #211 Richardson, TX 75081 972-739-7010 972-739-7013 (Fax) www.swdt.com ----- Original Message ----- From: "Dev" <dev@umpa-us.com> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, December 09, 2003 8:57 AM Subject: Re: [USR-TC] Digital/Analog Quad Card w/Daughter no analog?
I apologize for my ignorance but what do I need to do to ensure that it is Analog-Digital?
Is that the Nic or the Nac?
At 09:32 AM 12/9/2003, you wrote:
You can do this if your card is Analog or Analog-Digital.
Dev wrote:
Hello all,
I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue.
My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm
The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm.
What am I missing?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Well that answers that... it says Quad V.34 Digital Modem. I guess I am out of luck with this card! Anyone want to buy 2 V.34 Digital Modem Cards? or Trade 1 for 1 for a Digital Analog Modem Card?? At 10:00 AM 12/9/2003, you wrote:
Look on the front of the card, it will say Quad Analog/Digital on it. Shannan Young sky1@airmail.net Southwest Data Technology, Inc. 401 S. Sherman Street Suite #211 Richardson, TX 75081 972-739-7010 972-739-7013 (Fax) www.swdt.com ----- Original Message ----- From: "Dev" <dev@umpa-us.com> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Tuesday, December 09, 2003 8:57 AM Subject: Re: [USR-TC] Digital/Analog Quad Card w/Daughter no analog?
I apologize for my ignorance but what do I need to do to ensure that it is Analog-Digital?
Is that the Nic or the Nac?
At 09:32 AM 12/9/2003, you wrote:
You can do this if your card is Analog or Analog-Digital.
Dev wrote:
Hello all,
I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue.
My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm
The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm.
What am I missing?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (3)
-
alex -
Dev -
SWDT Inc.