From what I read - you can't mix a 70 and a 130 together.

NOTE: I'm FAR from an expert on that - just sure that I read it somewhere. But I wouldn't do it. But they can be hot swapped - I think you have to put the back part in first, leave it off, put in the front part, then turn it on. Again - I'm no expert, but that's what I remember. Joel -----Original Message----- From: Timothy C. Bohen [mailto:Tim@CMSInter.Net] Sent: Wednesday, July 24, 2002 11:12 AM To: Usr-Tc@Mailman. Xmission. Com Subject: [USR-TC] mixing 70A and 130A power supplies I think I have a 70A dying in my chassis, can I mix a 130A together with a 70A? Also can I hot insert a power supply? Thanks Timothy C. Bohen CMSInter.Net LLC / Crystal MicroSystems LLC =========================================== web : www.cmsinter.net email : Tim@CMSInter.Net phone : 989.235.5100 x222 fax : 989.235.5151 _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc