Ooops! You run 24 channels not 26 "over there" :-) doh! Phil - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
How do you go about setting up profiles for ISDN on a HiPer machine? I cannot seem to find that information anywhere. Thanks, Bryan NOC Technician COX Internet - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
At 01:42 PM 1/13/00 -0600, The NOC \(COX Internet\) wrote:
How do you go about setting up profiles for ISDN on a HiPer machine? I cannot seem to find that information anywhere.
The only difference between IDSN and dial-up is allowing concurrent connections. -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Kirk, We have our connection profiles stored on our TCH. We have an older TCH that is dying on us and we need to move the connection profiles over to the new HiPer TCH. Bryan ----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Thursday, January 13, 2000 1:52 PM Subject: Re: (usr-tc) Moving Profiles
At 01:42 PM 1/13/00 -0600, The NOC \(COX Internet\) wrote:
How do you go about setting up profiles for ISDN on a HiPer machine? I cannot seem to find that information anywhere.
The only difference between IDSN and dial-up is allowing concurrent connections.
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
It's much easier/management to setup as a radius profile than store them in the hiperARC. "The NOC (COX Internet)" wrote:
Kirk,
We have our connection profiles stored on our TCH. We have an older TCH that is dying on us and we need to move the connection profiles over to the new HiPer TCH.
Bryan
----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Thursday, January 13, 2000 1:52 PM Subject: Re: (usr-tc) Moving Profiles
At 01:42 PM 1/13/00 -0600, The NOC \(COX Internet\) wrote:
How do you go about setting up profiles for ISDN on a HiPer machine? I cannot seem to find that information anywhere.
The only difference between IDSN and dial-up is allowing concurrent connections.
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
-- Richard Lorbieski - richard@alpha1.net Chief Technical Officer - Senior System Administrator Alpha1 Internet http://www.alpha1.net 409.731.8236 - 877.4.alpha1 (877.425.7421) - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Richard, You would think so but our Technical Guru in that market doesn't trust our new Radius server. Therefore we need to find out how to store those profiles on that HiPer TCH. Bryan NOC Technician COX Internet ----- Original Message ----- From: "Richard Lorbieski" <richard@alpha1.net> To: <usr-tc@lists.xmission.com> Sent: Thursday, January 13, 2000 3:03 PM Subject: Re: (usr-tc) Moving Profiles
It's much easier/management to setup as a radius profile than store them in the hiperARC.
"The NOC (COX Internet)" wrote:
Kirk,
We have our connection profiles stored on our TCH. We have an older TCH that is dying on us and we need to move the connection profiles over to
the
new HiPer TCH.
Bryan
----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Thursday, January 13, 2000 1:52 PM Subject: Re: (usr-tc) Moving Profiles
At 01:42 PM 1/13/00 -0600, The NOC \(COX Internet\) wrote:
How do you go about setting up profiles for ISDN on a HiPer machine?
I
cannot seem to find that information anywhere.
The only difference between IDSN and dial-up is allowing concurrent connections.
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
--
Richard Lorbieski - richard@alpha1.net Chief Technical Officer - Senior System Administrator Alpha1 Internet http://www.alpha1.net 409.731.8236 - 877.4.alpha1 (877.425.7421)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't trust our |new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. | What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS.. -M - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
M, What I mean is to set up a user profile on the TCH so that it doesn't go to our Radius server to authenicate. Bryan NOC Technician COX Internet ----- Original Message ----- From: "Mike Wronski" <mike@coredump.ae.usr.com> To: <usr-tc@lists.xmission.com> Sent: Thursday, January 13, 2000 5:53 PM Subject: RE: (usr-tc) Moving Profiles
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't trust
our
|new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. |
What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS..
-M
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
On Fri, 14 Jan 2000, The NOC (COX Internet) wrote: You can create the entire user record (unique id and password) on then HARC, but this is not recomended. THe local users option is intended for small quantities and testing.. Managing many users could be quite a task. If you do create the user "localy", you can specify all of the specific options to you ISDN customer.. -M
M,
What I mean is to set up a user profile on the TCH so that it doesn't go to our Radius server to authenicate.
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't trust
our
|new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. |
What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS..
-M
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
+--------------------------------------+ Mike Wronski (mike@coredump.ae.usr.com) 3Com Network Systems Engineer - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
M, Ok, that is nice and all. But my original question was how to set that up? Where do I need to go to find that information. I cannot seem to find it anywhere. Thanks, Bryan NOC Technician COX Internet ----- Original Message ----- From: "Mike Wronski" <mwronski@coredump.ae.usr.com> To: <usr-tc@lists.xmission.com> Sent: Friday, January 14, 2000 8:35 AM Subject: Re: (usr-tc) Moving Profiles
On Fri, 14 Jan 2000, The NOC (COX Internet) wrote:
You can create the entire user record (unique id and password) on then HARC, but this is not recomended. THe local users option is intended for small quantities and testing.. Managing many users could be quite a task.
If you do create the user "localy", you can specify all of the specific options to you ISDN customer..
-M
M,
What I mean is to set up a user profile on the TCH so that it doesn't go to our Radius server to authenicate.
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't
trust our
|new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. |
What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS..
-M
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
+--------------------------------------+ Mike Wronski (mike@coredump.ae.usr.com) 3Com Network Systems Engineer
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
I haven't done much of this, but I believe this will set someone up to dial in with specified user/pass and then give them an address out of the pool: HiPer-1>> add usER testuser netWORK_SERVICE ppp pasSWORD tester tyPE netWORK To set params later: HiPer-1>> set user testuser ? This field is a KEYWORD. The possible values are: ALTERNATE_PHONE_NUMBER INPUT_FILTER PHONE_NUMBER CHAT_SCRIPT_NAME MESSAGE PORT_LIMIT DNIS_REAUTHENTICATION MODEM_GROUP SESSION_TIMEOUT EXPIRATION OUTPUT_FILTER TYPE IDLE_TIMEOUT PASSWORD I believe you MUST use radius if you want to assign an IP and route a block to them. You'll find much more info in the HArc user's guide at http://totalservice.usr.com (no login required to download the manual). Good Luck, Charles -- =-----------------= = | Charles Sprickman Internet Channel | | INCH System Administration Team (212)243-5200 | | spork@inch.com access@inch.com | = =----------------= On Fri, 14 Jan 2000, The NOC (COX Internet) wrote:
M,
Ok, that is nice and all. But my original question was how to set that up? Where do I need to go to find that information. I cannot seem to find it anywhere.
Thanks, Bryan NOC Technician COX Internet
----- Original Message ----- From: "Mike Wronski" <mwronski@coredump.ae.usr.com> To: <usr-tc@lists.xmission.com> Sent: Friday, January 14, 2000 8:35 AM Subject: Re: (usr-tc) Moving Profiles
On Fri, 14 Jan 2000, The NOC (COX Internet) wrote:
You can create the entire user record (unique id and password) on then HARC, but this is not recomended. THe local users option is intended for small quantities and testing.. Managing many users could be quite a task.
If you do create the user "localy", you can specify all of the specific options to you ISDN customer..
-M
M,
What I mean is to set up a user profile on the TCH so that it doesn't go to our Radius server to authenicate.
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't
trust our
|new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. |
What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS..
-M
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
+--------------------------------------+ Mike Wronski (mike@coredump.ae.usr.com) 3Com Network Systems Engineer
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
You cant find information on adding a user to the HiperARC? Where have you looked? Chapter 5 (Network Dialin Access) in both the 4.1 and 4.2 manuals have a setion entitled "User configuration Overview". Those setions explain the "ADD USER ..." commands and give examples for PPP dialup.. -M |-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Friday, January 14, 2000 9:07 AM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |M, | |Ok, that is nice and all. But my original question was how to set that up? |Where do I need to go to find that information. I cannot seem to find it |anywhere. | |Thanks, |Bryan |NOC Technician |COX Internet | |----- Original Message ----- |From: "Mike Wronski" <mwronski@coredump.ae.usr.com> |To: <usr-tc@lists.xmission.com> |Sent: Friday, January 14, 2000 8:35 AM |Subject: Re: (usr-tc) Moving Profiles | | |> On Fri, 14 Jan 2000, The NOC (COX Internet) wrote: |> |> You can create the entire user record (unique id and password) on then |> HARC, but this is not recomended. THe local users option is intended for |> small quantities and testing.. Managing many users could be quite a task. |> |> If you do create the user "localy", you can specify all of the specific |> options to you ISDN customer.. |> |> -M |> |> > M, |> > |> > What I mean is to set up a user profile on the TCH so that it |doesn't go |to |> > our Radius server to authenicate. |> > |> > |> > > |> > > |> > > |-----Original Message----- |> > > |From: owner-usr-tc@lists.xmission.com |> > > |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |> > > |Internet) |> > > |Sent: Thursday, January 13, 2000 3:38 PM |> > > |To: usr-tc@lists.xmission.com |> > > |Subject: Re: (usr-tc) Moving Profiles |> > > | |> > > | |> > > |Richard, |> > > | |> > > |You would think so but our Technical Guru in that market doesn't |trust |> > our |> > > |new Radius server. Therefore we need to find out how to store those |> > > |profiles on that HiPer TCH. |> > > | |> > > |> > > What do you mean by profile? If you want the harc to treat ISDN users |> > > differently than ANALOG, you are out of luck. The HARC does not |> > > differentiate between them.. This kind of granularity must be done on |the |> > > RADIUS server. The netserver did not care either. The only way to |make |> > some |> > > kind of difference was to use the Munich Card to terminate ISDN, but |this |> > is |> > > not the preferred method due to performance differences between the |Munich |> > > card and the Quad-I modems.. Munich was used at a time when |ISDN could |not |> > > be terminated on the QUADS.. |> > > |> > > -M |> > > |> > > |> > > - |> > > To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" |> > > with "unsubscribe usr-tc" in the body of the message. |> > > For information on digests or retrieving files and old messages send |> > > "help" to the same address. Do not use quotes in your message. |> > > |> > |> > |> > - |> > To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" |> > with "unsubscribe usr-tc" in the body of the message. |> > For information on digests or retrieving files and old messages send |> > "help" to the same address. Do not use quotes in your message. |> > |> |> +--------------------------------------+ |> Mike Wronski (mike@coredump.ae.usr.com) |> 3Com Network Systems Engineer |> |> |> |> - |> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" |> with "unsubscribe usr-tc" in the body of the message. |> For information on digests or retrieving files and old messages send |> "help" to the same address. Do not use quotes in your message. | | |- | To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" | with "unsubscribe usr-tc" in the body of the message. | For information on digests or retrieving files and old messages send | "help" to the same address. Do not use quotes in your message. | - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi, I am looking for a used Total Control Chasse with power supply no other cards if you know some one who has one let me know. Vince warlock@nci1.net At 09:07 AM 1/14/00 -0600, you wrote:
M,
Ok, that is nice and all. But my original question was how to set that up? Where do I need to go to find that information. I cannot seem to find it anywhere.
Thanks, Bryan NOC Technician COX Internet
----- Original Message ----- From: "Mike Wronski" <mwronski@coredump.ae.usr.com> To: <usr-tc@lists.xmission.com> Sent: Friday, January 14, 2000 8:35 AM Subject: Re: (usr-tc) Moving Profiles
On Fri, 14 Jan 2000, The NOC (COX Internet) wrote:
You can create the entire user record (unique id and password) on then HARC, but this is not recomended. THe local users option is intended for small quantities and testing.. Managing many users could be quite a task.
If you do create the user "localy", you can specify all of the specific options to you ISDN customer..
-M
M,
What I mean is to set up a user profile on the TCH so that it doesn't go to our Radius server to authenicate.
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't
trust our
|new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. |
What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS..
-M
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
+--------------------------------------+ Mike Wronski (mike@coredump.ae.usr.com) 3Com Network Systems Engineer
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Vincent - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi, I am looking for a used Total Control Chasse with power supply no other cards if you know some one who has one let me know. Vince warlock@nci1.net At 05:53 PM 1/13/00 -0600, you wrote:
|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of The NOC (COX |Internet) |Sent: Thursday, January 13, 2000 3:38 PM |To: usr-tc@lists.xmission.com |Subject: Re: (usr-tc) Moving Profiles | | |Richard, | |You would think so but our Technical Guru in that market doesn't trust our |new Radius server. Therefore we need to find out how to store those |profiles on that HiPer TCH. |
What do you mean by profile? If you want the harc to treat ISDN users differently than ANALOG, you are out of luck. The HARC does not differentiate between them.. This kind of granularity must be done on the RADIUS server. The netserver did not care either. The only way to make some kind of difference was to use the Munich Card to terminate ISDN, but this is not the preferred method due to performance differences between the Munich card and the Quad-I modems.. Munich was used at a time when ISDN could not be terminated on the QUADS..
-M
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Vincent - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi, I am looking for a used Total Control Chasse with power supply no other cards if you know some one who has one let me know. Vince warlock@nci1.net At 03:37 PM 1/13/00 -0600, you wrote:
Richard,
You would think so but our Technical Guru in that market doesn't trust our new Radius server. Therefore we need to find out how to store those profiles on that HiPer TCH.
Bryan NOC Technician COX Internet
----- Original Message ----- From: "Richard Lorbieski" <richard@alpha1.net> To: <usr-tc@lists.xmission.com> Sent: Thursday, January 13, 2000 3:03 PM Subject: Re: (usr-tc) Moving Profiles
It's much easier/management to setup as a radius profile than store them in the hiperARC.
"The NOC (COX Internet)" wrote:
Kirk,
We have our connection profiles stored on our TCH. We have an older TCH that is dying on us and we need to move the connection profiles over to
the
new HiPer TCH.
Bryan
----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Thursday, January 13, 2000 1:52 PM Subject: Re: (usr-tc) Moving Profiles
At 01:42 PM 1/13/00 -0600, The NOC \(COX Internet\) wrote:
How do you go about setting up profiles for ISDN on a HiPer machine?
I
cannot seem to find that information anywhere.
The only difference between IDSN and dial-up is allowing concurrent connections.
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
--
Richard Lorbieski - richard@alpha1.net Chief Technical Officer - Senior System Administrator Alpha1 Internet http://www.alpha1.net 409.731.8236 - 877.4.alpha1 (877.425.7421)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Vincent - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thus spake K Mitchell
At 01:42 PM 1/13/00 -0600, The NOC \(COX Internet\) wrote:
How do you go about setting up profiles for ISDN on a HiPer machine? I cannot seem to find that information anywhere.
The only difference between IDSN and dial-up is allowing concurrent connections.
Not true...in the HiPer Arc, the only real difference between ISDN and analog modems is really just an informational setting on the port indicating whether its an analog or digital connection. You can just as easily to multi-link and/or simultaneous-use connections with analog as you can with ISDN connections. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Hi, I am looking for a used Total Control Chasse with power supply no other cards if you know some one who has one let me know. Vince warlock@nci1.net At 05:24 PM 1/13/00 -0500, you wrote:
Thus spake K Mitchell
At 01:42 PM 1/13/00 -0600, The NOC \(COX Internet\) wrote:
How do you go about setting up profiles for ISDN on a HiPer machine? I cannot seem to find that information anywhere.
The only difference between IDSN and dial-up is allowing concurrent connections.
Not true...in the HiPer Arc, the only real difference between ISDN and analog modems is really just an informational setting on the port indicating whether its an analog or digital connection. You can just as easily to multi-link and/or simultaneous-use connections with analog as you can with ISDN connections. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Vincent - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Um, 23 on a PRI, 24 on a CT1, or 24 on an NFAS PRI - subsequent spans only. At 03:50 PM 1/13/00 +0000, you wrote:
Ooops! You run 24 channels not 26 "over there" :-) doh! Phil
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
--- Clayton Zekelman Managed Network Systems Inc. (MNSi) 875 Ouellette Avenue Windsor, Ontario N9A 4J6 tel. 519-985-8410 fax. 519-258-3009 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (10)
-
Charles Sprickman -
Clayton Zekelman -
Jeff Mcadams -
K Mitchell -
Mike Wronski -
Mike Wronski -
Phil Le Clercq -
Richard Lorbieski -
The NOC (COX Internet) -
Vincent Frallicciardi