(usr-tc) Static Routing Question
HELP!!!! I am trying to add a static route to my Hiper ARC that will send all traffic bound for 10.1.1.9 to 10.1.1.12. Here is the line I try to type in to the CLI. add ip route 10.1.1.9/32 gate 10.1.1.12 met 1 What I am trying to accomplish is to get the traffic bound for my web server (10.1.1.9) to go through another box (10.1.1.12) first to monitor the traffic. I get the following error. ERROR - Cannot add a static route for a range of addresses that is reachable from a directly connected network. The address of the Ethernet port of the HiperARC is 10.1.1.8 and is on the same subnet (/24) as the other IPs I am trying to route. Is there a way to get this route to stick? Is there another way to accomplish this? In a Cisco I could use an Access-List, but I see nothing built into 3Com like that. Any help would be appreciated. Mike Storjohann Internet Services Administrator HunTel.net mstorjohann@huntel.net <mailto:mstorjohann@huntel.net>
Also sprach Mike Storjohann
I am trying to add a static route to my Hiper ARC that will send all traffic bound for 10.1.1.9 to 10.1.1.12. Here is the line I try to type in to the CLI.
add ip route 10.1.1.9/32 gate 10.1.1.12 met 1
What I am trying to accomplish is to get the traffic bound for my web server (10.1.1.9) to go through another box (10.1.1.12) first to monitor the traffic. I get the following error.
ERROR - Cannot add a static route for a range of addresses that is reachable from a directly connected network.
Hrmm...I call that a bug. Looks like if you have a directly connected route, then it won't let you put in a more specific route...There really should be nothing special about directly connected routes that prevent you from putting in more specifics in there. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
participants (2)
-
Jeff Mcadams -
Mike Storjohann