What's the difference between ARC and HARC???
Telnet to the ARC and login Type in 'list chassis' If it's a Hiper you will show one of the following: Hiper Access Router NAC or Hiper II -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer
Uuuhm... On Tue, Feb 11, 2003 at 08:35:12PM -0500, alex wrote:
Ok. So I got Hiper Access Router Card. Does it mean that I have ARC and not HARC?
... well, would call it a HARC, but never had such a beast. ?! Oliver. -- Oliver.Francke@mediaWays.net fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking.
I dont know if you got my last message. So I write it once again. It was mistake: not NAC Card ID:19 but NAC Card ID:48 Thanks for help. Oliver Francke wrote:
Uuuhm...
On Tue, Feb 11, 2003 at 08:35:12PM -0500, alex wrote:
Ok. So I got Hiper Access Router Card. Does it mean that I have ARC and not HARC?
... well, would call it a HARC, but never had such a beast.
?!
Oliver.
Hi, On Tue, Feb 11, 2003 at 10:32:26AM -0600, Adam Barnhill wrote:
Telnet to the ARC and login Type in 'list chassis'
If it's a Hiper you will show one of the following: Hiper Access Router NAC or Hiper II
Yep, but this is only valid in a dynamic environment. Another way is: show board settings: ----- 8-< ---- . . . NAC Card ID: 48 NAC Card Name: HiPer Access Router NAC ----- 8-< ---- valid for a HiPerARC ----- 8-< ---- NAC Card ID: 63 NAC Card Name: HiPer Access Router II NAC ----- 8-< ---- guess what... :-) Hope it helps, Oliver. -- Oliver.Francke@mediaWays.net fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking.
NAC Card ID:19 NAC Card Name: HiPer Access Router NAC It's just ARC, isn't it? :) Thanks for help. Oliver Francke wrote:
Hi,
On Tue, Feb 11, 2003 at 10:32:26AM -0600, Adam Barnhill wrote:
Telnet to the ARC and login Type in 'list chassis'
If it's a Hiper you will show one of the following: Hiper Access Router NAC or Hiper II
Yep, but this is only valid in a dynamic environment. Another way is:
show board settings:
----- 8-< ---- . . . NAC Card ID: 48 NAC Card Name: HiPer Access Router NAC
----- 8-< ----
valid for a HiPerARC
----- 8-< ----
NAC Card ID: 63 NAC Card Name: HiPer Access Router II NAC
----- 8-< ----
guess what... :-)
Hope it helps,
Oliver.
On Tue, Feb 11, 2003 at 08:41:15PM -0500, alex wrote:
NAC Card ID:19 NAC Card Name: HiPer Access Router NAC
It's just ARC, isn't it? :)
According to the CHS.MIB this is: uchas486TrGatewayNAC OBJECT IDENTIFIER ::= { uchasKnownModules 19 } Regards, Oliver. -- Oliver.Francke@mediaWays.net fon. +49-5246-80-1389 mob. +49-171-5597734 I used to have a sig, but I've stopped smoking.
participants (3)
-
Adam Barnhill -
alex -
Oliver Francke