HiPer>> sho nmc NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: DISABLED DSA Idle Rebalancing: ENABLED Invariably your Chassis Awareness is DISABLED, which will mean no "DYNAMIC" enable nmc chassis_awareness Will fix it. You'll probably want to reboot the ARC. SMT -----Original Message----- From: K Mitchell [mailto:mitch@keyconn.net] Sent: Thursday, September 23, 1999 12:28 PM To: usr-tc@lists.xmission.com Subject: (usr-tc) Upgrading DSPs Finally got my new DSP problems straightened out for the most part. Original card was bad, swapped with a replacement. Everything appears to be fine except I can't get the type from STATIC to DYNAMIC, seems to be working ok though so I'm not sure what difference it makes. On to my main point, I'm currently running 1.2.60 on all cards and 4.1.59-6 ARC code. On the DSPs, should I go with 1.2.37 or move up to 2.0.81? Any problems with either? Same question on the ARC, is 4.2.31-1 worth bumping up to? Thanks, Kirk -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.