Re: [USR-TC] Digital/Analog Quad Card w/Daughter no analog?

You can do this if your card is Analog or Analog-Digital. Dev wrote:

Hello all,

I have seen several post about setting a Digital/Analog Quad Card up to allow POTS lines but none have addressed my issue.

My Issue is that in the TCM I have an option to set the line interface source to: (1) = nic (2) = t1Tdm (3) = priTdm

The problem is that the NIC setting will not set! I can go back and fourth between t1 Tdm and pri Tdm.

What am I missing?

_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc