disable ospf delete ospf default_area set ospf default_area_id 0.0.1.7 (you will need to change this to the correct area) set ospf global asbr enable set ip network ip routing_protocols ospf add ospf sendpolicy x.x.x.0/25 source local action advertise add ospf sendpolicy x.x.x.0/25 source remote action advertise (the above IPs are for the ip pools) set ospf global traps disable enable ospf set ospf interface <ip of box> router_priority 0 save all Todd ----- Original Message ----- From: "Adam Barnhill" <adam@semo.net> To: "'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'" <usr-tc@mailman.xmission.com> Sent: Wednesday, September 15, 2004 10:55 AM Subject: [USR-TC] Basic OSPF setup
Hi, Any of you guys have experience with setting up basic OSPF? I need to enable ospf on my ARCs and do a basic configuration. We need to know how to configure the Neighbor and AreaID variables.
I have looked at the knowledgebase and it doesn't seem clear.
If you should care to contact off-list: MSN: aleostax@hotmail.com
Thanks, Adam
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc