The easiest method to accomplish this would be to add a 3rd HiperARC to the TC. Assign 1st group of 3 HiperDSPs to First ARC using static assignment. Assign 2nd group of 3 HDSPs to 2nd ARC. Assign 3rd group of 3 HDSPs to 3rd ARC. Once this is completed configure each ARC with whatever specific group information is necessary such as: Gateway, IP Pool, Authentication Server. This will effectively create 3 groups within the same TC box. If you need NAT'd and Public IP Pools on the same group, you can specify which IP Pool to use with RADIUS. However, without adding a 3rd HiperARC to the solution I do not know of any way to allocate specific Authentication servers to specific modem groups. I hope this helps. -----Original Message----- From: usr-tc-bounces@mailman.xmission.com [mailto:usr-tc-bounces@mailman.xmission.com] On Behalf Of Mohsen Sent: Wednesday, February 20, 2008 7:44 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Feature of Cisco5350 in Total Control 1000 Dear All I need some feature in Cisco 5350 to be implemented in Total Control 1000. I have a Chassis with Cards listed below : 1 - 2 Power Modules 2 - 1 NMC 3 - 2 Hiper ARC 4 - 14 Hiper DSP I want to do the followings : Define groups which each group contain 3 Hiper DSP cards and then assign unique IP POOL and Gateway to each group. And each group has its Seperate Authentication Server. And Some groups using NAT in Total Control and some not. If someone could answer my problem I would appretiate. Best Regards, Mohsen mohsen1380@yahoo.com ________________________________________________________________________ ____________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc