-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Cant you just lock the port on your managed switch to 100 or 10Full Duplex and let the Arc 'autosense' to that ? I assume you've all tried that and it doesnt work?? Steve - -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Jeff McAdams Sent: Thursday, 31 October 2002 4:17 AM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] 10 Mbps half duplex Also Sprach Richard Roy
I would like to find a way to configure a port to 10 Mbps Full Duplex on hiperarc. I have a switch (Cisco Catalyst) that is capable of doing 10 Mbps half/full. It will be too costly to replace all my cards to support 10/100. When I set the switch port to 10 Mbps Full, the hiperarc default to 10 Mbps half because of autosensing logic. This create alignment errors...
So far, I am using up to 7 DSP per 10 Mbps half duplex connection. I see up to 4% collision rate. I am trying to get a better "Internet experience" out of my testing.
It will be "really" nice to have a manual speed & duplex setting. Because we use this interface like a "trunk", even at 100 Mbps autosensing I will prefer to see a manual setting.
I spoke to CommWorks and they want my company to pay for it because I'm the only customer requesting it.
*sigh* I asked for this feature *years* ago. - -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 -----BEGIN PGP SIGNATURE----- Version: PGP 7.1.1 iQA/AwUBPcA7osWMmDbfsys6EQKX/ACgnss9QrWQZyRnXXiauacwcHd2OUsAn074 6wagNVkTfPMRWV17pu90moWQ =h8bK -----END PGP SIGNATURE-----