What software version is your NMC? It almost sounds like you've got a 4 meg NMC, which isn't going to be able to manage a DSP at all -- gotta have 16 meg and the 16 meg code. Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville "Don't sweat the petty things, and don't pet the sweaty things." On Wed, 12 Jan 2000, Scot bethke wrote:
I am having the absolute worst time trying to get my HyperDSP cards working in any capacity what-so-ever. Hoping someone from here has seen this or can tell me what to check.
First i'm running HyperARC HW Version 19.0.0, with Version 4.1.59 Software. HyperDSP's are HW V 0.49.0, and I have thus far tried both 1.2.5 and 2.0.51 software. Im using PRI's and they both show up as UP and OPERATIONAL.
(2) Problems... First of all I cant manage the cards (any of them) with TCM. Running 6.0.23, had the same problem on 5.X TCM as well. What happenes is I select the card, click on configure, click on card level and then click ok. I can get the Hyper DSP/ARC Information item, and all values come in and display fine. However I click on "Routing Method" and it comes up with this:
Error Type: No Data Available Parameter: Modem Routing Method Object ID: 1.3.6.1.4.1.429.1.26.1.1.1.2.14000
Same type of message comes up on every query except info. I can communicate with the NMC card just fine (its an older NMC, not a HyperNMC). So I had to go in and USE HARM to program the HyperARC (that works fine btw), and I programmed the DSP's with a terminal.
Second Issue (and this is the big one) I have two PRI's, 23B+D, Bell atlantic says everything is fine with both of them. But they refuse to hunt from the first hyperDSP to the second. I plug in the first PRI into either DSP card and it takes calls and works like a charm till it gets to channel 23, where we get a fast busy from then on. Im hoping there is a special "Oh you havemore than one hyperDSP" button that I need to push. anyone know what might cause this?
-Scott
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.