U>Also sprach pferraro@wna-linknet.com U>> With all the talk of the new code, has anyone put the code on a U>>HiperArc with just 64 of memory? I have 4 HiperArcs Two with 128 U>and >two with 64. Three of the 4 are in production (live). Can the U>memory >from the 4th one be used to up grade the other HiperArc? U>I had it running in 64megs of RAM briefly during the beta...worked U>fine. Though it was slightly tricky to get it on there with only 8 U>megs of flash to work with. U>> Also, any problems with the FLASH 4 vice 8? U>4?! Didn't know such a beast existed...at least as shipped. I'd say U>all bets are off on being able to get the code on there in 4 megs. U>*Maybe* if you had the boot menu pull it down, but even that is gonna U>be really iffy (the 5.0.x code is almost 3 1/2 megs, and it has to go U>through some uncompress and reclaim cycles during the actual upgrade U>process - once you actually reboot to activate the new code - I'd say U>its unlikely to be able to pull that off) U>> We are not doing anything fancy, just ip.. No IPX, OSPF, etc U>If you could get the code on, you shouldn't have any problems running U>in 64 megs of ram...the flash issue is really iffy though. Can the HiPerArcs flash be upgraded from 8 to 16 megs ? Jeff Binkley ASA Network COmputing CMPQwk 1.42 9999 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.