What's the status with this bug? Has anyone rolled out v.92 yet? Does anyone have any status reports from using v.92? -Wayne ----- Original Message ----- From: "Randy Cosby" <dcosby@infowest.com> To: <usr-tc@mailman.xmission.com> Sent: Monday, March 11, 2002 2:33 PM Subject: RE: [USR-TC] New Code: Winmodem Bug
Yes, on 3.5.12.
Modem settings that changed from defaults:
Carrier Loss detect: 20 V44 mode: enabled Rings for Auto Answer: 0 V.92 Master enable V.92 Pcm Upstream enable V.92 Quick Connect Phase1 enable V.92 Quick Connect Phase2 enable V.92 Modem On Hold timeout8min
I made a few changes to the line settings to work with our switch/T1 (rather than PRI), but no changes since the last version when everything was working fine.
Randy
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Antonio Querubin Sent: Monday, March 11, 2002 1:08 PM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] New Code: Winmodem Bug
On Mon, 11 Mar 2002, Randy Cosby wrote:
Date: Mon, 11 Mar 2002 08:38:31 -0700 From: Randy Cosby <dcosby@infowest.com> Reply-To: usr-tc@mailman.xmission.com To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] New Code: Winmodem Bug
Just an update here. It appears the problem may be more widespread than just hangs on the usr/3com winmodems. I'm getting several reports of disconnections in the middle of relatively short downloads as well. I recommend holding off any planned upgrades out there, or stock up on the Excedrin.
Is this in the version 3.5.12 HiPer DSP code? What changes from the defaults have you configured into the line and modem settings?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc