Another likely culprit is having an MTU mismatch between the HiPerArc and the clients. Jeff Binkley ASA Network Computing u>Could be a retrain/renegotiations. Fire up TCM and see if the link is u>falling forward/back or has renegotiations/retrains. u>Paul Farber u>Farber Technology u>farber@admin.f-tech.net u>Ph 570-628-5303 u>Fax 570-628-5545 u>On Wed, 10 May 2000, Sergio Gonzalez wrote: u>> *This message was transferred with a trial version of u>> CommuniGate(tm) Pro* Hello. had anyone experienced problems with u>> modems on Hiper DSP that get stalled?. I've 5 DSP managed by 1 Hiper u>> ARC. The problem is sometimes when the dialup users are tx/rx u>> something, the user's modems just stops to receive for a while (1 u>> minute aprox). Then, the tx/rx flow continues. At the begining u>> blamed the sites the users visit, but this stalls happen also with u>> the servers in the same lan segment where the Hiper ARC resides. u>> Any ideas what should be happening? u>> Thanks u>> -- u>> Sergio Gonzalez u>> Calle 100 #8A-55 Torre C oficina 711 u>> sagonzal@sky.net.co u>> NOC- SkyNet de Colombia. u>> (57) +1 6422020 u>> (57) +3 2277871 u>> - u>> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" u>> with "unsubscribe usr-tc" in the body of the message. u>> For information on digests or retrieving files and old messages u>> send "help" to the same address. Do not use quotes in your u>> message. u>- u> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" u> with "unsubscribe usr-tc" in the body of the message. u> For information on digests or retrieving files and old messages send u> "help" to the same address. Do not use quotes in your message. u> CMPQwk 1.42 9999 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.