We usually update the customers winmodem to the latest version and their problems stop ... www.808hi.com has links to the latest code ... ----- Original Message ----- From: peter.olson@chi.frb.org To: usr-tc@lists.xmission.com Sent: Friday, June 16, 2000 5:46 PM Subject: (usr-tc) What HiperDSP code works best with Lucent Winmodem? Hello, We are having trouble connecting the new IBM 600x which bundles a Lucent winmode (yuck) to our TC /HiperDSP. On clean phone lines, the authentication terminal window will show a ton of garbage text. I have seen this before when we had X2 modems dialing our V.90 patched DSP's, so I am not surprised. Because we using Microsoft RAS on Egdeserver Pro 2.1.2 drivers (yuck again, I know), we are unable to upgrade the DSP's to the 2.0.x level firmware. The firmware we do have is 1.0.59 on two DSP's and 1.0.43 on two others. The problem seems worse on 1.0.43 DSP's. Does anyone out there know which level is best, or elimates this lucent winmodem problem? The 2.6 Edgeserver drivers which run on SP6a will support the 2.0.x DSP's, but these are still in Beta. I am not going to install 2.5 Edgeserver drivers if I can avoid it. The install is ugly. Thanks In advance, --Peter