On Tuesday 23 July 2002 12:29 pm, Todd Bertolozzi wrote:
1.3.6.1.4.1.429.4.2.1.10.0 to get the ports used off a hiperarc. Make sure that the hiperarc is setup properly by doing a list snmp communities. Make sure your NMS is in the access list with RO permissions. Here is what I get: HiPer>> list snmp commUNITiES
SNMP COMMUNITIES Community Name IP Address Access Community Pool Validate Address <my.private.comm.here> 208.29.17.202 Read/Write useAddress It is using the above that I get only the time. Should the useAddress be something else? As for my management station being in the ACL, where would I find that at? I have the IP of the computer I am testing with list in the TCM's hiperarc config in the default networm management station space and the read community string in the default community string space. Anything else I am missing? -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115