The NetServer 3.8.1 code running on two of our tc's is not Y2K Compliant. It's running NTP to accept the time from our time servers and shows the date to be incorrectly something with the year of 1900. Our HARC's are doing just fine via NTP. Want to find out if your netserver is reporting the date correctly? From the Command> prompt, type show time then Enter. Due to this fact, I would strongly suggest that 3Com 1) fix this problem in NTP on the NSC 3.8.1 code, 2) implement a way to set the date and time from the CLI on the NSC, and 3) remove the YES next to the NetServer PRI 3.8.1 Y2K Compliance check statement until it's fixed. Both of these would require new code for the NetServer. The 3Com case number for this problem is 154529. Kevin Benton Network Administrator SOTANet LLC, A Voyager.net Company E-Mail: s1kevin@tims.net Web: http://users.sota-oh.com/~s1kevin/ Unsolicited advertisements processing fee: $50 subject to change without notice - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.