hello all quick TC question... eth1 is routing for 208.149.160.0 eth2 is routing for 208.149.161.0 but subnet 208.149.160.128/255.255.255.240 is unreachable from the TC (but is in the default gw's routing table and is 'seen' by the reset of the network via static). How can I get the TC ARC to route that subnet to the gateway of 208.149.160.33? Every time I try to 'add ip route' it fails becuase the route is overlapping with a directly connected interface (eth1). If the ARC is a router, how do you set up local gw's for subnets? Thanks. Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.