Yes...change it to 23 ports. Also...don't forget the switch type under the dsp config. You must have the correct switch type when terminating PRI. Todd -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Terry Kennedy Sent: Tuesday, October 15, 2002 2:00 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Channel T1 to PRI Hey guys, anyone have a minute to help a guy into the 20th century? We are converting our service form Channelized T1 to PRI. I know on the T1 setting on the DSP we need to: Set the type from robbed bit to message oriented. Check the difference in dtmf or mf the number of digits My question is on the dsp and the chassis. I have the cards set statically and I have set the type as HDM_24 and the port density set to 24, should I change this to 23? Terry Kennedy OlyPen, Inc. _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc