There were some recent discussions on this topic (not sure if they were really answered).
 
You are going to have to setup NAT on the hiper arc if you want your customers to be using private space. I've never done it as we've always had public ip space on our pools.
 
I'm sure if you search the 3com docs for NAT related info you should be able to find something.
 
Todd
-----Original Message-----
From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of AkinTunde Popoola
Sent: Monday, January 22, 2007 4:45 AM
To: Mohsen; Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Subject: Re: [USR-TC] IP Pool and Gateway of Total Control

Moshen,
 
Are you thru now?
 
noticed your examples ip did not tally with pool. may ocurr if pool is not specified in setting up the network and there are more than on pool set up on the ARC.
 
Also you may need to execute a default route command on the ARC.
 
Regards
 
'Tunde

 
On 1/3/07, Mohsen <mohsen1380@yahoo.com> wrote:
Dear All
I need to set public IP address on hiper arc interface and private IP address pool , but when configured it the user connect to system couldn't browse internet. for example the setting is as below :

Hiper ARC interface IP address :  212.200.200.10
Default Gateway :  212.200.200.1

IP Pool :  192.168.100.1 size 60

the user connect to the system and get ip address from pool but they can't ping for example 192.9.9.3.

Please guide me if this is possible and what should I do ?

Thanks



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc