Hi, I would like to know the value for those HiperDSP parameters use with a CH-T1 FlexPath. My config shows: Dial in Address: Noaddress Ack Wink on dial in address info: Enabled (for the first and the last flexpath in the trunk) Every others DSP are set to disabled. Note: What happens otherwise (first flexpath ack wink = disabled) is that once that trunk fill up, none of the rest will accept calls - the customer hears the dialing, then dead air. Thank you. Richard Roy, CCNA Technical Associate Network Intelligence Design Richard.Roy@aliant.ca Phone: (506) 694-6983 Fax: (506) 694-2525 www.nbtel.nb.ca www.aliant.ca - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.