How many servers are their? This is where I'm confused. I have ARC-A and ARC-B. Set ARC-A as mpip client + server, plus set it to an NTP server (know of any good ones?). Set ARC-B as mpip client and add ip's of ARC-A's into it (what command?). Set the NTP to same NTP server s ARC-A. How does ARC-B know of ARC-A's ips? Add them their also? Thanks for your help so far. Paul Farber Farber Technology farber@admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 On Fri, 21 Apr 2000, Ronald Kushner wrote:
Paul Farber wrote:
Hello all,
I have two arcs in one chassis, they each have 5 DSP's.
Is there anyting special I need to configure for users to do multilink PPP with analog (v.90) or ISDN calls?
Yes, you need to set both ARCs to get their time from the same NTP server, then you need to set mpip clients to include the IPs of all your ARCs on the server, and then set mpip server to the IP address of the server in each of the clients. You will need to set up the server machine as a client of itself as well.
The set mpip server_state on the server to "on," and set the mpip client_state to "on" on each of the clients including the server.
If I wasn't too clear on this feel free to ask more questions in e-mail.
-Ron GLISnet, Inc. +1 810/939.9885
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.