I don't remember it that way but it may work (make sure the data is going out the DTE with the proper modem SX=X setting). I remember it that one would point all ISDN calls to the Netsetver on the Dual PRI card and and it would take care of the rest. Marshall "Long Tooth" Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Charles Sprickman" <spork@inch.com> To: <usr-tc@lists.xmission.com> Sent: Tuesday, December 17, 2002 1:45 PM Subject: [USR-TC] ISDN -> Quad -> serial?
Hi,
Can anyone confirm that with an old quad/netserver chassis you can accept ISDN calls on the PRI card, shuffle them off to the modem, and (if the netserver is inactive on that card), pump the data out the dte port on the quad (with analog nic)?
I found an old post alluding to that, just wondering if anyone has done it.
I assume there's also some sort of hack-around where the user would hit the netserver and do a reverse-telnet to the serial port...
Any ideas?
Thanks,
Charles
-- Charles Sprickman spork@inch.com
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc