Things changed in programed setting seem to save fine. Its really just the SNMP faults that I activate in Fault/'trap settings' that don't seem to save. Thank you for the help.... --Peter On Mon, 1 Jul 2002, Todd Bertolozzi wrote:
Hightlight the span portion on your dsp then go to programmed settings and make the changes you want.
Click set
Click ok
Highlight the DSP card
Click configure...actions
Change from hardware to software
Choose Save both T1/E1 and modems to NVRAM
click execute and wait for it to say success
Now change to hardware and do a harware reset.
Todd
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Peter Galbraith Sent: Monday, July 01, 2002 11:37 AM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] T1 alarm traps problem
I am trying to save the T1 & Modems. Maybe my problem is in testing. I use a harware reset or software reset. I have been thinking that these are a form of 'reboot'. Is this incorrect? After I save these to NVRAM, if I reset the card, the changes are back to defaults.
--Peter
On Fri, 28 Jun 2002, Mike Greene wrote:
At 01:31 PM 6/28/2002 -0600, you wrote:
Hi all,
I am having a problem getting my traps on a Hyper DSP card to save through a hardware reset. After setting up the traps I go to commands on the NMC and the DSP card and save to NVRAM, but the card still manages to reset itself on reboot. Any ideas? Am I saving in teh right place?
Highlight the DSP card, then go to commands|software|save T1 & Modems to NVRAM
that will commit the changes to the DSP card.
- Mike
------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc