The docs actually mention rev 54 & 55 for it. I have put it on all of mine which are 53's and 54's with no ill effects so far. Its been about a week. At 03:03 PM 1/12/00 -0500, you wrote:
The HiPer DSP code 2.0.60 will usually put timeslots Local Out of Service when a modem pair fails to reset. While this is still better than 2.0.81 where you may get fast busies or no answer, it's still not a complete solution. This scenario is true when the DSP mdmfail is set to Combo mode and the call routing method mdmrmeth is set to fixed assignment.
You should only run 2.0.51 if you have a rev 0.55 with Alliance SRAM chips on it instead of ISSI chips. Other 0.55 boards and older revs should run fine on 2.0.60 eventhough we have to put up with this annoying bug until 3Com fixes it.
Nick
-- Nicolas St-Pierre Systems Engineer Internet Access Solutions Ltd. Tel (905) 469-4953 Fax (905) 469-4954
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
Thanks, Greg Coffey <gcoffey@vcn.com> Visionary Communications V 307-234-5443 F 307-234-5446 100 N. Center #100, Casper, WY 82601 www.vcn.com - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.