I did wait enough (at least 10 minutes) but nothing changed. Joel - Fox Computers wrote:
When that is setup for dynamic (NMC Chassis Awareness is enabled, I think), it takes a short time after boot up before the ARC will show the chassis info, my guess is you didn't wait long enough.
-----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Tuesday, March 18, 2003 6:51 PM To: usr-tc Subject: [USR-TC] HiperARC unable to see DSPs
After powering off and then on chassis HiperARC was unable to see DSP cards: when I wrote LIST CHASSIS every slot was --EMPTY-- (except HiperARC card) but cards was loaded. Then I repowered chassis again and everything was ok.
Why did that things happen?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc