Oi, we need an FAQ. :) Also sprach Mike Storjohann
I hope you got all that!
Didn't need to...most of us on the list are *intimately* familiar with these issues. :)
Can you add the same static IP address in each ARC and have it use RIP to add a route in the connecting router? If so, will only the one that is in use by the user have an active RIP session?
If you have any ideas at all, please let me know.
You don't want a static route entered on the Arcs...while it *might* work...I'm not sure how you're setting it up, or how the Arcs handle routing advertisements for routes whose next-hop addresses are not reachable...the "correct" way to do it is to put the user's static IP address (and potentially route information) in their RADIUS profile, turn on RIP (probably v2) or OSPF and let the Arc advertise the static IP/route to the next-hop router when the user connects and the static IP/route gets added to the Arc by the RADIUS response. That way, when the user logs off, the route gets dropped by the Arc, gets dropped out of the routing advertisements (for RIP, set to max age then dropped for OSPF...same effect) until the user connects again. This is the whole idea for routing protocols...to let the network routing adapt to changing network topologies...in this case, the changing network topology is where the user is connected. :) -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.