Joshua, I don't recall the exact versions off the top of my head, but I seem to remember that I had to upgrade the DSP's to an interim version between 3.1 and 3.5. There was something incompatible with the settings between those. Read the docs carefully on that so you don't get burned. It wouldn't hurt to check for interim upgrade requirements for the ARC as well. Randy Cosby Vice President InfoWest, Inc P: 435-674-0165x1011 F: 435-674-9654 -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Joshua Coombs Sent: Monday, December 16, 2002 1:01 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Firmware payload Were looking at upgrading firmware from a mishmash of 4.3 and 4.5 code to 4.5 all around. After digging around, we've settled on a set of revisions to go for, but want to bounce it off others before we go all the way. Anyone see any reasons not to upgrade to the following code revs?: Current Firmware Payload: DS3 - 1.3.7 DSP - 3.1.110 NMC - 8.7.3 ARC - 5.2.112 Suggested Upgrade: DS3 - 1.3.7-4 DSP - 3.5.12 NMC - 8.7.3 ARC - 5.3.110 Joshua Coombs GWI Networking _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc