At how many ARCs and DSPs would we need to switch to 130A power supplies? Would having two 70A supplies serve the same purpose as having one 130A, other than the obvious fact that if one of them were to go down, the chassis would be very underpowered. :) Thanks! Chris Kalin ----- Original Message ----- From: "Todd Bertolozzi" <berto@voyager.net> To: <usr-tc@mailman.xmission.com> Sent: Friday, August 16, 2002 11:54 AM Subject: RE: [USR-TC] What is a conservative dsp to arc ratio?
I have many chassis setup dual arc (7 dsp's per arc on each chassis).
I have not noticed any issues with this. Guess it depends on how much stuff the arc is doing and how much memory it has. You can definitely go more then 3 though.
Todd
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Aaron Nabil Sent: Friday, August 16, 2002 11:19 AM To: 'usr-tc@mailman.xmission.com' Subject: [USR-TC] What is a conservative dsp to arc ratio?
I'm running 3 to 1 now, where have other people started seeing problems at?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc