Mohsen wrote:
Dear All I need to set public IP address on hiper arc interface and private IP address pool , but when configured it the user connect to system couldn't browse internet. for example the setting is as below :
Hiper ARC interface IP address : 212.200.200.10 Default Gateway : 212.200.200.1
IP Pool : 192.168.100.1 size 60
the user connect to the system and get ip address from pool but they can't ping for example 192.9.9.3.
Please guide me if this is possible and what should I do ?
Are the users able to ping the HiperARC's IP address? How about the default gateway? What kind of device is acting as the default gateway? In order to use private IP addresses in that way you will need to NAT those addresses behind a public IP address. I've never experimented with NAT on the HiperARC. In fact, I'm not even sure if it supports it. However, that is not to say that you can't perform the NAT on another device in front of the HiperARC - e.g. a router or PC. - Wayne -- Wayne A. Tucker IT and Network Operations Manager wtucker@donobi.com DONOBI, Inc. <http://www.donobi.com/> +1-360-782-4477 "The Internet Solutions Company"