Adam, I have found similar characteristics when the CAT 5 gives out, except that it usually reports Remote out of service. Occasionally, some of them report loos and the other roos. LOOS problems 2 modems at a time can indicate a bad DSP. Check the knowledgebase for more information on bad DSP detection. Modems usually fail in pairs. Adam -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Adam Olson Sent: Monday, June 28, 2004 2:43 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] HiperDSPs and Local Out of Service issue hello fellow total control admins... in one of my TC boxes w/ 8 or so HiperDSPs, i am seeing funny activity on a particular card running code rev 3.5.12. it has been operating fine for many years. today i am noticing that every 30-120 seconds it is cycling through random timeslots 2 at a time and reporting, for example: 01 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 02 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 03 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 04 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 05 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 06 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 07 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 08 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 09 LCL OOS N/A PB OOS 0x00000000 NONE 0x00000000 Ok 10 Idle N/A IS 0x00000000 NONE 0x00000000 Ok 11 Idle N/A IS 0x00000000 NONE 0x00000000 Ok after issuing these commands:
chdev tslot span1/tslot1> display atstat
you can see that this snapshot reports timeslot 09 Local Out of Service. 30 seconds later it will be timeslot 22, then 01, then 08, and so on. anyone seen this before in production? adam _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc