Also sprach pferraro@wna-linknet.com
With all the talk of the new code, has anyone put the code on a HiperArc with just 64 of memory? I have 4 HiperArcs Two with 128 and two with 64. Three of the 4 are in production (live). Can the memory from the 4th one be used to up grade the other HiperArc?
I had it running in 64megs of RAM briefly during the beta...worked fine. Though it was slightly tricky to get it on there with only 8 megs of flash to work with.
Also, any problems with the FLASH 4 vice 8?
4?! Didn't know such a beast existed...at least as shipped. I'd say all bets are off on being able to get the code on there in 4 megs. *Maybe* if you had the boot menu pull it down, but even that is gonna be really iffy (the 5.0.x code is almost 3 1/2 megs, and it has to go through some uncompress and reclaim cycles during the actual upgrade process - once you actually reboot to activate the new code - I'd say its unlikely to be able to pull that off)
We are not doing anything fancy, just ip.. No IPX, OSPF, etc
If you could get the code on, you shouldn't have any problems running in 64 megs of ram...the flash issue is really iffy though. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.