February 2007 - USR-TC - mailman.xmission.com

Hiper DSP Does not boot
by Mohsen 13 Feb '07

13 Feb '07

Dear All I have a Hiper DSP card which isn't boot properly. When I put the in the chassis the RN/FL led will remain red. What should I do I ? Thanks, Mohsen mohsen1380(a)yahoo.com ____________________________________________________________________________________ Need Mail bonding? Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users. http://answers.yahoo.com/dir/?link=list&sid=396546091

4 3

Re: [USR-TC] Hiper DSP E1 ISDN ( PRI ) : D-channel goes down whensystem is restarted
by Mohsen 07 Feb '07

07 Feb '07

Dear Todd Thanks for your reply. I'm using the Command Line ( console ) to enter commands. after I run "cmd dchanup" I'll save the work to DSP NVRam with the command "cmd svspcfg". But after restarting ( or E1 modem hangup ) the D-Channel will be down. Please Guide me more . Best Regards, Mohsen mohsen1380(a)yahoo.com ----- Original Message ---- From: Todd Bertolozzi <berto(a)core.com> To: Mohsen <mohsen1380(a)yahoo.com>; Discussion relating to the 3Com/US Robotics Total Control modemsystems. <usr-tc(a)mailman.xmission.com> Sent: Tuesday, February 6, 2007 11:38:02 PM Subject: RE: [USR-TC] Hiper DSP E1 ISDN ( PRI ) : D-channel goes down whensystem is restarted I've never had experience with E1 but I'm assuming it's very similar to setting up a standard T1. Are you issuing the command 'cmd dchanup' from the DSP card? I believe what you're going to want to do is bring up that chassis using the NMC / total control manager and configure the dsp settings from there using TCM. Then you can save the settings and they'll be there when you reboot. It's also a much nicer interface than consoling into the dsp. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com(a)mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Mohsen Sent: Tuesday, February 06, 2007 12:29 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Hiper DSP E1 ISDN ( PRI ) : D-channel goes down whensystem is restarted Dear All I have a Hiper DSP with E1 ISDN program loaded to it. When I connect the E1 link from modem to the card D-channel is down and I should force it to be up with the command "cmd dchanup". Atfer the D-channel is up , but when the system is restarted it goes down. Please guide me what to do with this problem. Best Regards, Mohsen mohsen1380(a)yahoo.com ________________________________________________________________________ ____________ Looking for earth-friendly autos? Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center. http://autos.yahoo.com/green_center/ _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc ____________________________________________________________________________________ Need Mail bonding? Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users. http://answers.yahoo.com/dir/?link=list&sid=396546091

2 1

Hiper DSP E1 ISDN ( PRI ) : D-channel goes down when system is restarted
by Mohsen 06 Feb '07

06 Feb '07

Dear All I have a Hiper DSP with E1 ISDN program loaded to it. When I connect the E1 link from modem to the card D-channel is down and I should force it to be up with the command "cmd dchanup". Atfer the D-channel is up , but when the system is restarted it goes down. Please guide me what to do with this problem. Best Regards, Mohsen mohsen1380(a)yahoo.com ____________________________________________________________________________________ Looking for earth-friendly autos? Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center. http://autos.yahoo.com/green_center/

2 1

RE: [USR-TC] This page can't be displayed!!
by Adam Barnhill 06 Feb '07

06 Feb '07

Kirti, We once saw similar issues due to an MTU setting. Might be something to check out. Adam -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Monday, January 30, 2006 8:47 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Simple. When some users connect to the internet using dial-in, they have no problem connecting to our network. But when they try to connect out of our network, such as yahoo, they get a message "this page can't be displayed". It happens intermittently. Any suggestion? Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Todd Sent: Monday, January 30, 2006 8:11 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! What's your problem Kirti? I may be able to help. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com(a)mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Saturday, January 28, 2006 6:50 PM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Charles: This is a typo. Each pool is 24. FYI, 3COM assigns the IP address with no problem. Back to my original problem. I hope you can help. Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Charles Sprickman Sent: Saturday, January 28, 2006 6:32 PM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] This page can't be displayed!! On Sat, 28 Jan 2006, Kirti S. Bajwa wrote: > ARC1(Port 15) 12.21.237.241 IP Pool: 12.21.237.48/31 > ARC2(Port 16) 12.21.237.242 IP Pool: 12.21.237.96/31 If that's not a typo, those pools each contain only two IP addresses... That would cause problems. Charles > Kirti > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

7 12