September 2006 - USR-TC - mailman.xmission.com

RE: [USR-TC] This page can't be displayed!!
by Adam Barnhill 06 Feb '07

06 Feb '07

Kirti, We once saw similar issues due to an MTU setting. Might be something to check out. Adam -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Monday, January 30, 2006 8:47 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Simple. When some users connect to the internet using dial-in, they have no problem connecting to our network. But when they try to connect out of our network, such as yahoo, they get a message "this page can't be displayed". It happens intermittently. Any suggestion? Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Todd Sent: Monday, January 30, 2006 8:11 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! What's your problem Kirti? I may be able to help. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com(a)mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Saturday, January 28, 2006 6:50 PM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Charles: This is a typo. Each pool is 24. FYI, 3COM assigns the IP address with no problem. Back to my original problem. I hope you can help. Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Charles Sprickman Sent: Saturday, January 28, 2006 6:32 PM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] This page can't be displayed!! On Sat, 28 Jan 2006, Kirti S. Bajwa wrote: > ARC1(Port 15) 12.21.237.241 IP Pool: 12.21.237.48/31 > ARC2(Port 16) 12.21.237.242 IP Pool: 12.21.237.96/31 If that's not a typo, those pools each contain only two IP addresses... That would cause problems. Charles > Kirti > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

7 12

Question regarding latest Hiper ARC code
by Adam Olson 18 Sep '06

18 Sep '06

Hello everyone, After cancelling my support contracts years ago due to a lack of updates and decent support, I'm trying to figure out the latest version of TCS as I've recently started to see random HiperARC reboots and subsequent dialin problems. Source Technology seems to have let their website go, anyone have any details on the latest DSP/ARC combos? I'm currently running 5.0.9 on my ARCs and 3.5.12 on my HiperDSP PRI cards. I've been running this particular combination for at least 3-4 years it seems and have recently noticed an increase in random reboots, more of them occuring on the higher volume boxes than the lower ones. Before that, I believe the latest and greatest was 2.1.9 for DSPs and some 4.x code for the ARCs, but that was too long ago to remember at this point. Thanks for any input. Adam

3 2

Call monitoring
by Brian C. Doyle 18 Sep '06

18 Sep '06

Hello all, Is there a way to monitor when a call comes in and what the packets are that are being sent with the TC1000. In my setup the call comes in and a socket connection is established to a server. These call are not using any authentication but setup for a proprietary use and I would like to be able to see the connection on the TC1000. Is that possible? _____ UMPA Brian C. Doyle Vice President of Technology United Merchant Processing Association http://www.umpa-us.com 1-800-555-9665 ext 212

5 8

looking for those cisco router cards & cables
by Aaron Nabil 18 Sep '06

18 Sep '06

I'd like to find some of those cisco router cards and cable sets that go to the quad modems, I'm trying to get a few spares. thx, Aaron

2 1

Re: [USR-TC] Question regarding latest Hiper ARC code
by Adam Olson 16 Sep '06

16 Sep '06

I've been wondering the same thing as well. However, I do have certain boxes that reboot much more frequently and they handle a higher volume of calls. All of the hardware is of the same age. So, it made me think maybe there is something like a memory leak in TCS that after X amount of time, the card effectively dies and reboots. You would think would have been the case a long time ago though. Which versions of code are you running and do you know what the latest is? I suppose the cards could also reboot more often with higher volume due to aging as well, it just seems very odd. Thanks, Adam >I've been noticing the same thing on our dialup pools. I wonder if it is >more age related than software? ----- Original Message --------------- Subject: [USR-TC] Question regarding latest Hiper ARC code From: Adam Olson <adamo(a)humboldt1.com> Date: Sat, 16 Sep 2006 12:47:29 -0700 (PDT) To: usr-tc(a)mailman.xmission.com > > > > > >Hello everyone, > >After cancelling my support contracts years ago due to a lack of updates >and decent support, I'm trying to figure out the latest version of TCS as >I've recently started to see random HiperARC reboots and subsequent >dialin problems. > >Source Technology seems to have let their website go, anyone have any >details on the latest DSP/ARC combos? > >I'm currently running 5.0.9 on my ARCs and 3.5.12 on my HiperDSP PRI >cards. I've been running this particular combination for at least 3-4 >years it seems and have recently noticed an increase in random reboots, >more of them occuring on the higher volume boxes than the lower ones. >Before that, I believe the latest and greatest was 2.1.9 for DSPs and >some 4.x code for the ARCs, but that was too long ago to remember at this >point. > >Thanks for any input. > >Adam >

1 0

RE: [USR-TC] snmp
by Adam Barnhill 13 Sep '06

13 Sep '06

I've included my last collection of mibs for TC 1000 hardware in a .zip located here. http://www.megaupload.com/?d=77ZQOFI0 These were current as of June 2003. The specific OID you requested is not readily available to me at this time. If I find it, I will forward it along. Oh, and the software at totalscrutinizer.com does this type of thing if you would prefer to use a gui. -- Adam -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Wednesday, September 13, 2006 3:45 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] snmp Hi I extremly need oid SNMP command for disconnecting a diaulup user in Total Control 1000. MIB file of Total Control Also may help me very much. Thanks Shahrooz Sharghi

1 0

snmp
by Shahrooz Sharghi 13 Sep '06

13 Sep '06

Hi I extremly need oid SNMP command for disconnecting a diaulup user in Total Control 1000. MIB file of Total Control Also may help me very much. Thanks Shahrooz Sharghi

1 0

Hiper DSP Problem
by Shahrooz Sharghi 06 Sep '06

06 Sep '06

Hi, I have a TC1000 with 3 E1 Hiper DSP card and 4 analog card, sometimes users who want to connect to E1 lines; receive busy tone or silence . only when we plug out and plug in E1 card, they can connect to it. it is not on a specific card and all 3 cards have this problem. How do you think about this problem? We have changed 130 Am Power also Hiper ARC and NMC card. still the same problem. Do you think it is for a problem with chassis? Best Regards Shahrooz Sharghi

1 0

3Com TCH-1000 Clearance Promotion !!
by choi 06 Sep '06

06 Sep '06

1 0