June 2006 - USR-TC - mailman.xmission.com

RE: [USR-TC] This page can't be displayed!!
by Adam Barnhill 06 Feb '07

06 Feb '07

Kirti, We once saw similar issues due to an MTU setting. Might be something to check out. Adam -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Monday, January 30, 2006 8:47 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Simple. When some users connect to the internet using dial-in, they have no problem connecting to our network. But when they try to connect out of our network, such as yahoo, they get a message "this page can't be displayed". It happens intermittently. Any suggestion? Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Todd Sent: Monday, January 30, 2006 8:11 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! What's your problem Kirti? I may be able to help. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com(a)mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Saturday, January 28, 2006 6:50 PM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] This page can't be displayed!! Charles: This is a typo. Each pool is 24. FYI, 3COM assigns the IP address with no problem. Back to my original problem. I hope you can help. Kirti -----Original Message----- From: usr-tc-bounces+kbajwa=tibonline.net(a)mailman.xmission.com [mailto:usr-tc-bounces+kbajwa=tibonline.net@mailman.xmission.com] On Behalf Of Charles Sprickman Sent: Saturday, January 28, 2006 6:32 PM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] This page can't be displayed!! On Sat, 28 Jan 2006, Kirti S. Bajwa wrote: > ARC1(Port 15) 12.21.237.241 IP Pool: 12.21.237.48/31 > ARC2(Port 16) 12.21.237.242 IP Pool: 12.21.237.96/31 If that's not a typo, those pools each contain only two IP addresses... That would cause problems. Charles > Kirti > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

7 12

Call monitoring
by Brian C. Doyle 18 Sep '06

18 Sep '06

Hello all, Is there a way to monitor when a call comes in and what the packets are that are being sent with the TC1000. In my setup the call comes in and a socket connection is established to a server. These call are not using any authentication but setup for a proprietary use and I would like to be able to see the connection on the TC1000. Is that possible? _____ UMPA Brian C. Doyle Vice President of Technology United Merchant Processing Association http://www.umpa-us.com 1-800-555-9665 ext 212

5 8

FS: Nearly a ton of USR/3Com stuff (literally)
by Brad Gass 27 Jun '06

27 Jun '06

OK, I know most if not all of you have some (or, a lot) of this old stuff lying around, but I thought I'd give it a shot. I have dozens upon dozens of digital quads, a number (a dozen or two) analog/digital quads (some with analog NIC's), a half-dozen or so AS51 cards (some with cables), Netservers, and NMC's (some 56k enabled), as well as power supplies (45A, 70A AC and DC), and the associated boat-anchor chassis. Can anyone use *any* of this stuff? I mean I would take practically any offer for most of the items if I can find a good home for it. Obviously, the chassis aren't worth even consideration, but the modem cards I would be willing to ship separately to someone who could put them to good use. The AS51 cards used to be worth something, can anyone use them? I think I had upgraded them all to 16R by 8 or 16F, latest IOS (and can load the latest if you need it). Several sets of cables are also available (although I know I don't have enough for all). I also have quad RS232 fan-out cables available, about 10 if memory serves. Finally, I have one NetServer 8 v.34 available, latest firmware and configuration wiped. Hit me off-list, preferrably at bradg(a)mnns.com for details. I hate to see it *all* hit the recycling bin, but that's where it's headed if nobody can use it. Brad

1 0

WTB: ARC II
by Steve Rivera - WRCA.Net 27 Jun '06

27 Jun '06

Immediate need for a couple of these card sets. Anybody have sets for sale? >>>>The older 3Com version is the 69-002106-00. >>>>The newer of UTStarcom version is 223026200 Let me know... Thanks. Steve Rivera <steverivera(a)wrca.net> WR Consultant Associates, Inc. (732) 833-2111 x102 AIM: srivera711 URL: www.wrca.net End-to-End WAN Solutions Since 1981... "Selection Sets Us Apart"

1 0

3Com TCH-1000 Clearance Promotion !!
by choi 21 Jun '06

21 Jun '06

1 0

WTB: 3Com MultiSpan 96 card sets
by Steve Rivera - WRCA.Net 21 Jun '06

21 Jun '06

Have immediate need for... Qty 3- 3C0504222-00 TC1000 96 port MultiSpan Modem Card Set. Any assistance will appreciated deeply. Steve Rivera <steverivera(a)wrca.net> WR Consultant Associates, Inc. (732) 833-2111 x102 AIM: srivera711 URL: www.wrca.net End-to-End WAN Solutions Since 1981... "Selection Sets Us Apart"

1 0

What's the Going Rate (buying)
by Adam Barnhill 20 Jun '06

20 Jun '06

Can some of you that sell TC equipment tell me the going rate for the each of the following items in their unbundled form? Feel free to reply off-list. - Chassis with integrated fan assembly - 130 Amp AC Dual power sets - Hiper DSP Card : T1/PRI - Hiper ARC Card : 128M - ARC II Card : 256M - Hiper NMC Card : 16M - NMC 333 Card : 128M -- Adam Barnhill

1 0

3Com TCH-1000 Hot Sale !!
by Ms.Choi 15 Jun '06

15 Jun '06

4 3

RE: [USR-TC] Ethernet Traffic
by Adam Barnhill 07 Jun '06

07 Jun '06

More like Target[eth1]: #eth\:1:public@192.168.1.1 note: if you actually have a working copy of mrtg, you can use "cfgmaker --ifref=name public(a)192.168.1.1 > arc.cfg" to generate a config that will monitor all interfaces. -- Adam Barnhill 573-686-9114 -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of John Biniecki Sent: Tuesday, June 06, 2006 3:43 PM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: RE: [USR-TC] Ethernet Traffic Like such: public@192.168.1.1:eth:1 ?? -----Original Message----- From: usr-tc-bounces+johnbin=ll.net(a)mailman.xmission.com [mailto:usr-tc-bounces+johnbin=ll.net@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, June 06, 2006 2:38 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Ethernet Traffic John, I don't know about a specific oid, but if you are using MRTG you can just point it to the ARC IP, supply a community string, specify either "eth:1 or eth:2" for the interface name and it should graph IP traffic for the specified port. -- Adam Barnhill 573-686-9114 -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of John Biniecki Sent: Tuesday, June 06, 2006 1:56 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Ethernet Traffic Does anyone know what the oid is for ethernet traffic on the ARC? I am trying to plot total traffic in mrtg. Thank you John P. Biniecki Director of Information Systems Tiger Communications, Inc. 116 W. Illinois St., Suite 6E Chicago, IL 60610 (312) 399-8903 johnbin(a)LL.net _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

RE: [USR-TC] Ethernet Traffic
by Adam Barnhill 06 Jun '06

06 Jun '06

John, I don't know about a specific oid, but if you are using MRTG you can just point it to the ARC IP, supply a community string, specify either "eth:1 or eth:2" for the interface name and it should graph IP traffic for the specified port. -- Adam Barnhill 573-686-9114 -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of John Biniecki Sent: Tuesday, June 06, 2006 1:56 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Ethernet Traffic Does anyone know what the oid is for ethernet traffic on the ARC? I am trying to plot total traffic in mrtg. Thank you John P. Biniecki Director of Information Systems Tiger Communications, Inc. 116 W. Illinois St., Suite 6E Chicago, IL 60610 (312) 399-8903 johnbin(a)LL.net _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1