Do you have console access to it? If so plug in and watch the boot
process. It should indicate what the error is.
If you get a CRC error or corrupt firmware type error, use the aux port
to upload new code. Plug in to the aux port with 115200 8 n 1, then
reseat the front. After a few moments you should get a prompt, at which
time you will need to input the upload command. I believe this is
AT{Z1}, but I may be mistaken. Once it is uploaded properly, you'll need
to switch back to the console port at 9600. If it's not fixed, you
should get a different error. Please let us know what the error is.
-----Original Message-----
From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com
[mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of
Shahrooz Sharghi
Sent: Monday, March 07, 2005 10:23 AM
To: Discussion relating to the 3Com/US Robotics Total Control
modemsystems.
Subject: Re: [USR-TC] e1 pri dsp software download
thanks a lot
i placed card in another slot but still has same problem.
my tcm is 8.2.6
i think it is not booting fully. how can i repair it?
----- Original Message -----
From: "Adam Barnhill" <adam(a)semo.net>
To: "Discussion relating to the 3Com/US Robotics Total Control
modemsystems." <usr-tc(a)mailman.xmission.com>
Sent: Monday, March 07, 2005 7:47 PM
Subject: RE: [USR-TC] e1 pri dsp software download
> If it shows with a ? Then it is not booting fully/properly. Reseat the
> both sides of the card and try it again. Remember front out, back out,
> back in, front in. Also, it may be that your TCM version is older than
> the TCS version of code on your DSP.
>
> -----Original Message-----
> From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com
> [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf
> Of Shahrooz Sharghi
> Sent: Sunday, March 06, 2005 1:45 PM
> To: usr-tc(a)mailman.xmission.com
> Subject: [USR-TC] e1 pri dsp software download
>
>
> hi, i want to software download e1 pri dsp card with tcm.(file:
> he030513.dmf) but i recive this message:
> "failed, devices are not read yet"
> in the tcm instead of showing this dsp slot "?" appears.
> is it possible my card has r2 software?
>
>
> _______________________________________________
> USR-TC mailing list
> USR-TC(a)mailman.xmission.com
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
>
> _______________________________________________
> USR-TC mailing list
> USR-TC(a)mailman.xmission.com
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________
USR-TC mailing list
USR-TC(a)mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
If it shows with a ? Then it is not booting fully/properly. Reseat the
both sides of the card and try it again. Remember front out, back out,
back in, front in.
Also, it may be that your TCM version is older than the TCS version of
code on your DSP.
-----Original Message-----
From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com
[mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of
Shahrooz Sharghi
Sent: Sunday, March 06, 2005 1:45 PM
To: usr-tc(a)mailman.xmission.com
Subject: [USR-TC] e1 pri dsp software download
hi, i want to software download e1 pri dsp card with tcm.(file:
he030513.dmf) but i recive this message:
"failed, devices are not read yet"
in the tcm instead of showing this dsp slot "?" appears.
is it possible my card has r2 software?
_______________________________________________
USR-TC mailing list
USR-TC(a)mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
hi, i want to software download e1 pri dsp card with tcm.(file:
he030513.dmf) but i recive this message:
"failed, devices are not read yet"
in the tcm instead of showing this dsp slot "?" appears.
is it possible my card has r2 software?
Buying Qty
Edgeserver card
(AMD K3-400mhz processor)
PN# 69-001825-00
also need.
130A DC power Sets
please email of list with any of these items you may have available.
Steve Rivera
WR Consultant Associates, Inc.
Dir: 732-833-2111 x102
IM: srivera711
www.wrca.net Providing Network Hardware Since 1981.
