July 2004 - USR-TC - mailman.xmission.com

RE: [USR-TC] compression
by Joel - Fox Computers 15 Jul '04

15 Jul '04

So your radius is sending the wrong value for "auto", it needs to be a 4. -----Original Message----- From: Joel - Fox Computers Sent: Thursday, July 08, 2004 1:22 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] compression Just checked - Auto is 4, not 0, for Compression Algorithm -----Original Message----- From: Lewis Bergman [mailto:lbergman@wtxs.net] Sent: Thursday, July 08, 2004 11:42 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] compression After doing a mon rad as suggested this is what I am seeing from the TC box with compression set to auto. 192.168.1.252 1812 192.168.1.204 1645 42 Access-Accept --------------------------------------------------------------------- Time Stamp : 22-NOV-2003 04:17:15 --------------------------------------------------------------------- Service-Type : 2 Framed-Protocol : PPP Idle-Timeout : 900 Filter-Id : virus Compression-Algorithm : 0(None) Framed-Compression : 1 With compression on the RADIUS server set to Microsoft I get this from a show session. INFORMATION FOR SESSION username Service Type: Framed Framed Protocol: PPP Idle Timeout: 900 Speed of Connection: Auto NAS IP Address: 208.29.17.204 Login Service: Telnet Interface Name: slot:8/mod:15 Active Session ID: 5637802 Traffic Threshold: 0 Keep Alive Interval: 0 Framed IP Netmask: 0.0.0.0 MLPPP Fragmentation Threshold: 0 Framed Routing: None Framed Callback Identifier: 0 Compression Algorithm: Microsoft Compression Reset Mode: Auto Filter Id Input: virus.in Receive Acc Map: 0 Transmit Acc Map: 0 Filter Id Output: virus.out And this from a mon rad: --------------------------------------------------------------------- Source-IP Src-Port Destination-IP Dest-Port Id Packet-Type --------------------------------------------------------------------- 192.168.1.252 1812 192.168.1.204 1645 48 Access-Accept --------------------------------------------------------------------- Time Stamp : 22-NOV-2003 04:23:25 --------------------------------------------------------------------- Service-Type : 2 Framed-Protocol : PPP Idle-Timeout : 900 Filter-Id : virus Compression-Algorithm : 3(Microsoft) Framed-Compression : 1 That all sounds fine and dandy. But, what is going to happen when someone connects with a non-microsoft client like Mac or Linux? I also noted that there is an Ascend compression and we do have one TNTMax box and I wonder if that should be a concern. Basically it appears as if the auto setting is seen as the same as the none setting. Does anyone know the numerical value for Auto? What I guess I am sending is "0" which is none. If I Knew the true value I could fix my USR dictionary, which I think came from USR. hmmm. Joel, is the auto setting working for you? If so, what does a mon rad show as the response value for it? -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-695-6962 ext 301 800-299-6962 _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 8

Want To Buy: 3Com/USR Quad Cables
by Russell Newberry 14 Jul '04

14 Jul '04

I'm looking for about 10 or so. Let me know what you have! Thanks, Russell Newberry ==================== Maxis Technologies, Inc 433 W. Wilshire Blvd. Ste 2B Oklahoma City, OK 73116 Voice: 1-800-79-MAXIS Int'l: 1-405-842-3331 FAX: 1-405-841-7882 find us on the web at www.maxistech.net email to: russell(a)maxistech.net AOL IM "RUSSELLatMAXIS"

2 2

Routes propagation issue
by Sergio Gonzalez 13 Jul '04

13 Jul '04

Hello. I've been trying to send a 2 hosts subnet over dial-up on a TC Hub. I've Hiper Arc and Hiper DSP. The route is well applied (when I do a list ip routes it appears good). Also all my HiperARCs run on RIP v2 (propagating ppp IP addresses). When I send the little subnet through a dial-up ppp connection (lets say 192.168.0.0/30) if I look in the routing table of the rest of the routers that belong to the rip group, I found 192.168.0/24 pointing to the Hiper ARC that manages the dial-up connection. How do I prevent that summarization?. I only need the rest of the routers to see 192.168.0.0/30. Thanks a lot in advance for the help. Sergio Alejandro Gonzalez Director Operativo Network and Services Field Manager SkyNet de Colombia. Calle 100 No. 8A-55 Of. 711 Bogota, Cundinamarca Colombia, South America. Tel: 57 (+1) 6 422 020 Cel: 57 (+3)/(03315) 3551034 Pager: 5405555, 3469999 Cod 2010

2 4

Problem with Protocol type?
by Jamie Orzechowski 13 Jul '04

13 Jul '04

Hello ... when i do a "list session" I am noticing alot of customers listed as "UNKNOWN" in the protocol type field ... some are showing as PPP but they all should be ... any ideas what is wrong?? HiPer>> list sess SESSIONS Name Conn_Type Prot_Type EBJ WAN UNKNOWN bnk WAN UNKNOWN cra WAN UNKNOWN jlm WAN UNKNOWN rmw WAN PPP Pyke WAN UNKNOWN cars WAN UNKNOWN daja WAN UNKNOWN dove WAN UNKNOWN

1 0

USR-TC Long Connection
by S H A N 09 Jul '04

09 Jul '04

hi, i am curious to find out that what usually the list members would recommend for abnormally long connections? i am running a hiper DSP chasis and once in a month or so get a fake long connection to handle. any suggestions how to fix it even from happening? rgds,

4 6

RE: [USR-TC] compression
by Joel - Fox Computers 08 Jul '04

08 Jul '04

Just checked - Auto is 4, not 0, for Compression Algorithm -----Original Message----- From: Lewis Bergman [mailto:lbergman@wtxs.net] Sent: Thursday, July 08, 2004 11:42 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] compression After doing a mon rad as suggested this is what I am seeing from the TC box with compression set to auto. 192.168.1.252 1812 192.168.1.204 1645 42 Access-Accept --------------------------------------------------------------------- Time Stamp : 22-NOV-2003 04:17:15 --------------------------------------------------------------------- Service-Type : 2 Framed-Protocol : PPP Idle-Timeout : 900 Filter-Id : virus Compression-Algorithm : 0(None) Framed-Compression : 1 With compression on the RADIUS server set to Microsoft I get this from a show session. INFORMATION FOR SESSION username Service Type: Framed Framed Protocol: PPP Idle Timeout: 900 Speed of Connection: Auto NAS IP Address: 208.29.17.204 Login Service: Telnet Interface Name: slot:8/mod:15 Active Session ID: 5637802 Traffic Threshold: 0 Keep Alive Interval: 0 Framed IP Netmask: 0.0.0.0 MLPPP Fragmentation Threshold: 0 Framed Routing: None Framed Callback Identifier: 0 Compression Algorithm: Microsoft Compression Reset Mode: Auto Filter Id Input: virus.in Receive Acc Map: 0 Transmit Acc Map: 0 Filter Id Output: virus.out And this from a mon rad: --------------------------------------------------------------------- Source-IP Src-Port Destination-IP Dest-Port Id Packet-Type --------------------------------------------------------------------- 192.168.1.252 1812 192.168.1.204 1645 48 Access-Accept --------------------------------------------------------------------- Time Stamp : 22-NOV-2003 04:23:25 --------------------------------------------------------------------- Service-Type : 2 Framed-Protocol : PPP Idle-Timeout : 900 Filter-Id : virus Compression-Algorithm : 3(Microsoft) Framed-Compression : 1 That all sounds fine and dandy. But, what is going to happen when someone connects with a non-microsoft client like Mac or Linux? I also noted that there is an Ascend compression and we do have one TNTMax box and I wonder if that should be a concern. Basically it appears as if the auto setting is seen as the same as the none setting. Does anyone know the numerical value for Auto? What I guess I am sending is "0" which is none. If I Knew the true value I could fix my USR dictionary, which I think came from USR. hmmm. Joel, is the auto setting working for you? If so, what does a mon rad show as the response value for it? -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-695-6962 ext 301 800-299-6962 _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] compression
by Joel - Fox Computers 08 Jul '04

08 Jul '04

OK - your radius info looks right. Do a mon rad and watch an authentication and make sure that the ARC is recognizing the USR-Compression-Algorithm=Auto in the Access-Accept response from the Radius server. I'm no radius expert, but if it's not seeing it, it might be that your dictionary on your radius server has the wrong value or something. I dunno - it's always worked for me, I'd just check to see that it's seeing it. Next, at the Hiper ARC, give it a "set ppp ccp all" followed by a "save all" command. Then, do a test dial up and see that the compression is on. On Windows 2K (and XP?) go to status of the connection, then the details tab, and it should list Compression as "MPPC" if it's working. Not sure if it says the exact same thing on XP, but will be something similar. On Win9x, you open the connection status and it will have a box at the bottom (you might have to click Details button or something to see it) that shows Password Authentication Protocol, TCP/IP, and (if compression is on) Microsoft Compression. [Wording may not be exact, but you get the idea]. Hope that helps. Anyway - that's what I do - and the compression is always there. Find a big pure text file and download it. If your internet pipe is good, you'll should see up to about 1 Mbps throughput. If nothing else, that will tell you the compression is working. - Joel -----Original Message----- From: Lewis Bergman [mailto:lbergman@wtxs.net] Sent: Thursday, July 08, 2004 9:57 AM To: USR-TC(a)mailman.xmission.com Subject: [USR-TC] compression I have listed a show session for a user. All user's RADIUS attributes look like this: Framed-Protocol PPP Service-Type Framed-User Idle-Timeout 900 Filter-Id virus USR-Compression-Algorithm Auto Framed-Compression VJ-TCP-IP-header-ompression All of my users show the Compression Algorythem as none. Is this normal? Do I need to enable or set each slot/card/Arc to enable the compression via the cli? Anyclues here would be appreciated. INFORMATION FOR SESSION username Service Type: Framed Framed Protocol: PPP Idle Timeout: 900 Speed of Connection: Auto NAS IP Address: 208.29.17.203 Login Service: Telnet Interface Name: slot:11/mod:19 Active Session ID: 7471186 Traffic Threshold: 0 Keep Alive Interval: 0 Framed IP Netmask: 0.0.0.0 MLPPP Fragmentation Threshold: 0 Framed Routing: None Framed Callback Identifier: 0 Compression Algorithm: None Compression Reset Mode: Auto Filter Id Input: virus.in Receive Acc Map: 0 Transmit Acc Map: 0 Filter Id Output: virus.out -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-695-6962 ext 301 800-299-6962 _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

compression
by Lewis Bergman 08 Jul '04

08 Jul '04

I have listed a show session for a user. All user's RADIUS attributes look like this: Framed-Protocol PPP Service-Type Framed-User Idle-Timeout 900 Filter-Id virus USR-Compression-Algorithm Auto Framed-Compression VJ-TCP-IP-header-ompression All of my users show the Compression Algorythem as none. Is this normal? Do I need to enable or set each slot/card/Arc to enable the compression via the cli? Anyclues here would be appreciated. INFORMATION FOR SESSION username Service Type: Framed Framed Protocol: PPP Idle Timeout: 900 Speed of Connection: Auto NAS IP Address: 208.29.17.203 Login Service: Telnet Interface Name: slot:11/mod:19 Active Session ID: 7471186 Traffic Threshold: 0 Keep Alive Interval: 0 Framed IP Netmask: 0.0.0.0 MLPPP Fragmentation Threshold: 0 Framed Routing: None Framed Callback Identifier: 0 Compression Algorithm: None Compression Reset Mode: Auto Filter Id Input: virus.in Receive Acc Map: 0 Transmit Acc Map: 0 Filter Id Output: virus.out -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-695-6962 ext 301 800-299-6962

1 0

Total Control kit for sale
by Jonathan Edwards 02 Jul '04

02 Jul '04

Qty 12 Type 8 130A PSI P/N 1.009.1528-00 Qty 2 Type 9 130A PSI P/N 1.009.1530-00 Qty 2 Type 9 130A PSI P/N 1.009.1531-00 Qty 1 Edge Server Pro 1 SIMM 1 processor 2 (?) disk with the following P/N on stickers: 60-001887-00 69-001889-00 70-002586-00 Qty 6 Edge Server pro 1 SIMM 2 processor 2 (?) disk with the following P/N on stickers: 60-001888-00 69-001889-00 70-002589-00 (some have -01 rather than -00 in places, and one doesn't have the 69-001889-00 sticker) Qty 5 Dual 10/100 NIC P/N 69-002157-01 Qty 5 Async card (1 connector supporting 8 lines?) P/N 69-003281-00 Qty 9 Cisco AS51 card P/N 69-000957-00 Qty 9 Async card (2 connectors supporting 16 lines?) P/N 69-000958-00 Qty 8 TWH NIC NETSVR CISCO ASYNC cable P/N 67-000958-00 Qty 1 Total Control chassis 1.020.0631-00 w/2x130A PSU, 2x130A PSI, HiPer NMC, 10/100 NMC NIC & lots and lots of fans... email jonatha(a)qx.net for details

1 0

RE: [USR-TC] Total Control Blowout - SAVE $500.00
by Joel - Fox Computers 01 Jul '04

01 Jul '04

Hell ya, I can beat that price - anybody needs a chassis, I'll take $4500.00 each for them. :-) LOL -----Original Message----- From: Shannan Young [mailto:sky1@airmail.net] Sent: Thursday, July 01, 2004 11:03 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Total Control Blowout $500.00 / fully loaded chassis Screwed up! Chassis are $500.00 each like it says in the header, not $5000.00 like it says in the text. I'll take $5000.00 each for them :-) !! Shannan Young sky1(a)airmail.net AOL IM: swdtinc Southwest Data Technology, Inc. 401 S. Sherman Street Suite #211 Richardson, TX 75081 972-739-7010 972-739-7013 (Fax) www.swdt.com ----- Original Message ----- From: "Shannan Young" <sky1(a)airmail.net> To: <USR-TC(a)mailman.xmission.com> Sent: Thursday, July 01, 2004 10:52 AM Subject: [USR-TC] Total Control Blowout $500.00 / fully loaded chassis Haven't Been on this list in a long time. A lot of you guys know me, I have sold you fully loaded chassis in the past. I am down to ~ 50 fully loaded Hiper chassis that I need to move by the end of next month. We are clearing out the warehouse where we have these chassis stored and making room for different lines of equipment. We are getting into the DSL and wireless market. So here's the deal: Fully loaded Hiper Chassis for $5000.00 each. (Quantity Discounts available) Fully loaded chassis consists of : (14) Hiper DSP's (2) Hiper ARC's (128Mb Version) (1) Hiper NMC (1) Blue Labeld Chassis w/ Dual 130 Amp AC power ---At this price we are offering a 30 day warranty. All these chassis are in excellent condition. At this price now is the time to buy a chassis for back-up or just spare parts. thanks for your time, Shannan Young sky1(a)airmail.net AOL IM: swdtinc Southwest Data Technology, Inc. 401 S. Sherman Street Suite #211 Richardson, TX 75081 972-739-7010 972-739-7013 (Fax) www.swdt.com _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0