March 2004 - USR-TC - mailman.xmission.com

RE: [USR-TC] WTB: Loaded Hiper Chassis, TCS 4.5 (or 4.7)
by Kirti S. Bajwa 25 Mar '04

25 Mar '04

$800.00 + shipping. Tested, All latest software installed, in very decent shape. Kirt -----Original Message----- From: Brad Gass [mailto:bradlists@mnns.com] Sent: Thursday, March 25, 2004 1:07 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] WTB: Loaded Hiper Chassis, TCS 4.5 (or 4.7) Joel, Stephen, all, Anyone have a loaded chassis for sale? Looking for dual 130A AC PSU's, dual 128MB HiperARC, 14 HiperDSP, and HiperNMC. Red USR or Blue 3Com chassis is fine, but it needs to be in decent shape (not bent or scratched to bits) and the fans should be in good working order too :) Also looking for slot "blanks" if anyone has some for sale. Need blanks for 8 slots front and back (total of 16). I can make them out of black G-10, but I'd rather not if I don't need to! Thanks! Brad _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Total Control error message
by John R. Aynesworth 23 Mar '04

23 Mar '04

My logs are filling up with errors like Mar 23 19:50:05 arc0 At 19:41:38, Facility "IP", Level "UNUSUAL":: ip_rcv() Received datagrams with bogus source address - 127.0.0.1 Can anyone tell me what's going on? John R. Aynesworth Alexssa/Hnet 303 N. Main St. West Bend, WI 53095 voice: (262) 338-3742 fax: (262) 338-3387 email: jra(a)hnet.net

1 0

Anybody selling Hiper NMC's?
by Stephen Rivera - WRCA.Net 23 Mar '04

23 Mar '04

Looking for 2 cards sets. PN# 69-003440-00 Hiper NMC card sets. Let me know if you can help me out. PS... Still have bundles by the boatloads. Same low price. ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Providing Hardware Solutions Since 1981.

1 0

HiperDSP and Sychronous/HDLC
by Dev 23 Mar '04

23 Mar '04

Hello all, I am trying to setup my DSP T1 Modem to run Synchronous and or HDLC. I have the TCM available as well as TCL What do I need to do to 1. Check the current setup 2. Change to Sync or HDLC if not how i want? ---------- UMPA Brian C. Doyle Director, Internet Services United Merchant Processing Association <http://www.umpa-us.com>http://www.umpa-us.com 1-800-555-9665 ext 212

2 1

ARC Routing Question
by Joel - Fox Computers 22 Mar '04

22 Mar '04

Trying to figure out how to do something, hope someone can help. Have an ISDN user that is assigned a static IP address by RADIUS. I need to route a subnet to his address. I tried to do this using the command: add ip route 205.159.68.0/27 gateway 38.119.184.24 metric 1 After doing this, a "list ip route" shows this: 205.159.68.0/27 NetMgr 38.119.184.24 1 slot2:/mod:7 (or whatever port they are connected to) If we reboot the Hiper ARC, the route shows up as this: 205.159.68.0/27 NetMgr 38.119.184.24 1 eth:1 And no longer routes the subnet to the ISDN user. Any suggestions on what I need to do to make this work and keep working (surviving a reboot)? Thanks, Joel

3 2

RE: [USR-TC] ARC Routing Question
by Joel - Fox Computers 22 Mar '04

22 Mar '04

Will give that a try. THANKS! -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Monday, March 22, 2004 9:51 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] ARC Routing Question Well....you'd have something like this in the radius profile that indicates the ip address they're being assigned: Framed-IP-Address = 192.168.1.17 Then you would have something like this that indicates the route statement: Framed-Route = 192.168.1.16/29 192.168.1.17 1 Framed-IP-Netmask = 255.255.255.255 The first part is their network block, the second part would be their ip address and the 1 is the metric. Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc(a)mailman.xmission.com> Sent: Monday, March 22, 2004 10:39 AM Subject: RE: [USR-TC] ARC Routing Question > Todd - thanks - that sounds like a good possibility - but I'm not very good with RADIUS - any idea what the entry might look like? > > - Joel > > -----Original Message----- > From: Todd Bertolozzi [mailto:berto@core.com] > Sent: Monday, March 22, 2004 8:08 AM > To: Discussion relating to the 3Com/US Robotics Total Control > modemsystems. > Subject: Re: [USR-TC] ARC Routing Question > > > Can't you add the route statement to the users radius profile as well? > > Todd > ----- Original Message ----- > From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> > To: "Discussion relating to the 3Com/US Robotics Total Control > modemsystems." <usr-tc(a)mailman.xmission.com> > Sent: Saturday, March 20, 2004 12:09 PM > Subject: [USR-TC] ARC Routing Question > > > > Trying to figure out how to do something, hope someone can help. Have an > ISDN user that is assigned a static IP address by RADIUS. I need to route a > subnet to his address. I tried to do this using the command: > > > > add ip route 205.159.68.0/27 gateway 38.119.184.24 metric 1 > > > > After doing this, a "list ip route" shows this: > > > > 205.159.68.0/27 NetMgr 38.119.184.24 1 slot2:/mod:7 > > (or whatever port they are connected to) > > > > If we reboot the Hiper ARC, the route shows up as this: > > > > 205.159.68.0/27 NetMgr 38.119.184.24 1 eth:1 > > > > And no longer routes the subnet to the ISDN user. > > > > Any suggestions on what I need to do to make this work and keep working > (surviving a reboot)? > > > > Thanks, > > > > Joel > > > > > > > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] ARC Routing Question
by Joel - Fox Computers 22 Mar '04

22 Mar '04

Todd - thanks - that sounds like a good possibility - but I'm not very good with RADIUS - any idea what the entry might look like? - Joel -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Monday, March 22, 2004 8:08 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] ARC Routing Question Can't you add the route statement to the users radius profile as well? Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> To: "Discussion relating to the 3Com/US Robotics Total Control modemsystems." <usr-tc(a)mailman.xmission.com> Sent: Saturday, March 20, 2004 12:09 PM Subject: [USR-TC] ARC Routing Question > Trying to figure out how to do something, hope someone can help. Have an ISDN user that is assigned a static IP address by RADIUS. I need to route a subnet to his address. I tried to do this using the command: > > add ip route 205.159.68.0/27 gateway 38.119.184.24 metric 1 > > After doing this, a "list ip route" shows this: > > 205.159.68.0/27 NetMgr 38.119.184.24 1 slot2:/mod:7 > (or whatever port they are connected to) > > If we reboot the Hiper ARC, the route shows up as this: > > 205.159.68.0/27 NetMgr 38.119.184.24 1 eth:1 > > And no longer routes the subnet to the ISDN user. > > Any suggestions on what I need to do to make this work and keep working (surviving a reboot)? > > Thanks, > > Joel > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

Hiper Arc Code 5.3.3
by Kris McElroy 18 Mar '04

18 Mar '04

I have Hiper Arc Code 5.3.3 on a Hiper Arc. I am trying to access it via HARM 2.2.6 and it says "Your Router is running 5.3.3. HARM 5.2 works with ARC 5.2* How Can I manage this Hiper Arc with HARM? Thanks, Kris McElroy

5 4

qr051009
by teddy＠peugeot504.net 17 Mar '04

17 Mar '04

Dear All, Does Anyone have this modem version 5.10.9 qr051009.nac ? pls send me, TIA Rgds, -ts-

1 0

RE: [USR-TC] Hiper Arc Code 5.3.3
by Joel - Fox Computers 17 Mar '04

17 Mar '04

Get an older version of HARM. v. 1.1.8 works with it because it doesn't check version at startup. Now, you will find some features that either aren't there (are newer than HARM 1.1.8) or don't work (were changed after 1.1.8). But you can get into it, and I know some things, like setting up filters, setting up RADIUS, etc. do work because I've used them. - Joel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ FYI for everyone: Still have some loaded V.92 Racks available for sale. Give me a call if interested and make me an offer! 712-792-8990 Thanks! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Kris McElroy [mailto:kris.mcelroy@duracom.net] Sent: Wednesday, March 17, 2004 1:00 PM To: Usr-Tc(a)Mailman.Xmission.Com Subject: [USR-TC] Hiper Arc Code 5.3.3 I have Hiper Arc Code 5.3.3 on a Hiper Arc. I am trying to access it via HARM 2.2.6 and it says "Your Router is running 5.3.3. HARM 5.2 works with ARC 5.2* How Can I manage this Hiper Arc with HARM? Thanks, Kris McElroy _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0