November 2003 - USR-TC - mailman.xmission.com

GWC Modem Error in Syslog
by David Sovereen 11 Nov '03

11 Nov '03

Hello, I keep seeing the following error coming from one of my HiperARCs being reported through Syslog: At 20:15:24, Facility "GWC Modem Driver", Level "CRITICAL":: callline->callstate = 9 Does anyone know what this means? It sounds like I might have a DSP card that has a modem failing, but I cannot figure out how to determine which card and which modem it is that is causing me trouble. Has anyone run across this before? Any ideas/suggestions would be appreciated. Thanks, Dave

3 2

Factory Default of Hiper ARC
by Ahamed Bauani 11 Nov '03

11 Nov '03

Hello All I have a grate problem. Just few days ago our USR-TC is working find. But when we were going to change some configuration like IP address,IP Pool etc it start problem. My current problem is I cann't access to Hiper ARC by consol or from network (Telnet). When we reboot the TC with consol connected it's only showing : Booting*...* Loading Kernel....OK Then no other messages on consol. I tryied to telnet it over network but it didn't respond, ping it, result same. I am sure that this Hiper ARC card is OK, but some how I removed the IP of this and disable administration via consol. My current position is " I HAVE NO ACCESS TO THIS CARD!!" Think only it's be possible if somehow I can get it back to factory default. Do you have any idea how to set it factory default? Or any other suggation... really in a bad position. please help. Thanks in advance; Ahamed Bauani. __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com

5 5

Quad analog modems DTE
by Parham D. Beheshti 11 Nov '03

11 Nov '03

Hello I got 16 quad analog modems, 1 netserver and 1 386 nmc ... from tcm I cant set dte to packet bus. It sets fine to packet bus but as when I do a Get. I shows nic. Well, I saved to nv, softreset, hard reset, still the same problem. Please let me know if I should change a jumper or a setting to get modems talk to netserver on packet bus Thank you in advance Parham

1 0

TCS Software Needed
by Parham D. Beheshti 11 Nov '03

11 Nov '03

Hi I bought a total control chasis off ebay and I'm kindda stuck with the thing right now I was wondering if anybody can suggest a good version of software for my chasis an maybe even provide it :-) I got 386 nmc Netserver 4mb Quad modems Parham(a)tgamenet.com Thank you in advance parham

1 0

RE: [USR-TC] TC Software Development - anything happening?
by Joel - Fox Computers 10 Nov '03

10 Nov '03

Just FYI - I've been kinda holding out on renewing for the same reason - never need anything but software, and the software doesn't appear to be changing - really feels like TC development kinda died when 3Com sold it. Any other thoughts? -----Original Message----- From: Brad Gass [mailto:bradlists@mnns.com] Sent: Monday, November 10, 2003 12:07 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] TC Software Development - anything happening? Hello, all. Well, there hasn't been a message posted here for nearly three months, so I'm not sure the list is even alive anymore :) Hope this finds you and your gear in working order! Anyway, I was recently contacted by Source-T about renewing my software support contract, and it occurred to me that there has been *nothing* new released since February of 2003, and not a word of future releases here on this list (or anywhere else that I could find). So, my immediate reaction to the question about renewing is "why?" If nothing appears to be happening, why renew? So, my question to those who are more tuned-in (or a lot of days - clued-in) than I is - has there been, will there be, or is there any reason otherwise to expect future software releases out of UTStar (or whomever Commworks has become now) that would give me any reason at all to renew my contract? Any new features in the works, any serious bugs I haven't read about, anything new on the horizon at all? I'm currently running TCS 4.7 and CEM, had virtually no issues with it thus far (other than a flaky DSP card at one point), and with the value of used USR/3Com TC chassis and hardware being less than a rusted out '79 Ford Pinto, I certainly don't need hardware support/warranty - I've got spares for everything and then some. I like my TC gear, I just don't currently see much value in renewing a support contract. Thoughts? Brad Gass Minnesota Network Services 117 North 3rd Street Marshall, MN 56258 507-532-5932 Office Phone 507-532-6002 Fax 507-829-3490 Cellular bradg(a)mnns.com Email (off-list) _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

WTS TC1000 Bundles, ARC, MultiSpan, HDSP's
by Stephen Rivera - WRCA.Net 05 Nov '03

05 Nov '03

Chassis with dual 130A power Hiper NMC 2- Hiper ARC 14- Hiper DSP $1500.00 Chassis with dual 130A power Hiper NMC ARC MultiSpan96 $7500 ARC (not hiper arc) card set $2500 Hiper ARC (128/16) $125 Hiper DSP (negotiable) Quad Bundles 48 port with Hiper ARC $250 Total Switch $300 Sportster 28.8 $25 Sportster 33.6 $30 Sportster 56K $50 ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net WRCA , Inc. - 481 Wright Debow Rd. Jackson, NJ 08527

1 0