November 2003 - USR-TC - mailman.xmission.com

Hidden commands
by alex 12 Oct '04

12 Oct '04

What does command _set memory threshold critical/high/low do? For what is this threshold used? P.S. (for them who dont know): to show hidden commands type "_reveal commands" and then type "?".

3 4

[USR-TC] Trying To Prevent Virus Spread Need Help With Filters ASAP!
by Travis M. Best 08 May '04

08 May '04

Can Someone Provide Me With Detailed Instructions On How To Block Port 135 Both Incoming And Outgoing On My Chassis Including The Command To Exit Out Of The Editor Please Help Triyng To Prevent A Virus From Spreading Thanks Travis M. Best sysadmin(a)sunqwest.net -- This message has been scanned for viruses and dangerous content by SunQwest MailScanner, and is believed to be clean.

2 1

MP/16 Managed new sdl = ?
by Sergei Markelov 15 Dec '03

15 Dec '03

We have USR Total Control MP/16 Managed modem pool (sku# 001268-0). According to the page 100-102 of manual from http://support.3com.com/docs/rapd/mp16vsnm.pdf this device can work with leased line only on speed 19200 (v.34 must be disabled). I guess this is a software problem since MP/16 non-managed (sku# 000939-0) had the same restriction 19200 with old sdl's, but can use V.34 and do 33600 on leased lines with new sdl's (and standart USR Courier also can use V.34 on leased lines since 1996). Maybe this can be solved by loading new SDL - our pool is very old (the answer on ATI7 command is below). It seems that sdl's for MP/16 non-managed cannot be used in this case. Does anybody have newer SDL's for MP/16 Managed ? ati7 Configuration Profile... Product type US/Canada Rackmount Options HST,V32bis,Terbo,V.FC,V34+ Fax Options Class 1/Class 2.0 Clock Freq 20.16Mhz Eprom 256k Ram 32k Supervisor date 03/13/96 DSP date 11/29/95 Supervisor rev 2.0.8 DSP rev 1.2.7 OK Thank you! Sergei Markelov technical director Moscow Center for Continuous Mathematical Education www.mccme.ru markelov(a)mccme.ru +7-095-2410500phone +7-095-2916501fax

2 1

RE: [USR-TC] HiPer ARC & TCM!!!!
by Kirti S. Bajwa 10 Dec '03

10 Dec '03

Wayne: Please also answer configuration of HiPer DSP. I have configured it only using TCM (no CLI). Does it work or HiPer DSP should be configured from CLI? Thanks. Kirt -----Original Message----- From: Wayne Barber [mailto:barberw@tidewater.net] Sent: Monday, September 22, 2003 11:39 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] HiPer ARC & TCM!!!! TCM was never meant to configure or control the ARC. It's only use with the ARC is to display hardware and software versions. The results you are seeing are normal. HARM, IMHO, was never a reliable product. You are better off using CLI to program the ARC. On 20 Sep 2003 at 17:36, Kirti S. Bajwa wrote: > Hello List: > > I finally figured out how to configure HiPer ARC using CLI & HARM. However, > when I display ARC in TCM, none of the settings are showing! Can someone > explain why? > > Thanks. > > Kirt Bajwa > TIB Computer Systems > Mountain City, TN 37683 > Tel: (423) 727-3001 > eMail: kbajwa(a)tib.com <mailto:kbajwa@tib.com> > > Wayne Barber Coastal Telco Services _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

4 3

IP RIP/routing-advertisement
by Andre Dalle 28 Nov '03

28 Nov '03

I have my HiperARC cards working fine with static routes in our router, but I want to get dynamic routes working since we're spanning 2 subnets now. I've enabled RIP, but the HiperARC doesn't seem to be advertising any routes: hiper0-nic0>> show ip rip counters IP RIP COUNTERS Received RIP Packets: 0 Transmitted RIP Packets: 0 Received incorrect RIP Packets: 0 hiper0-nic0>> show ip routiNG IP ROUTER SETTINGS IP Router Administrative Status: ENABLED IP Static Remote Routes: ENABLED IP Router ID: 134.117.137.3 IP Autonomous System Number 1 IP Max Table Size: 11400 IP Max Metric Entries: 512 IP RIP ENABLED IP Number RIP Interfaces: 0 IP Number RIP Neighbors: 0 IP RIP Flags: METRICS SEND_REQUEST I can't find anything in the docs about setting up RIP interfaces or neighbours. What must I do to get this going? -- Andre Dalle [adalle(a)ncf.ca] Systems Administrator, National Capital Freenet [http://www.ncf.ca]

2 2

TC1000 v90 / v92
by Stephen Rivera - WRCA.Net 25 Nov '03

25 Nov '03

In stock. Tested. 30 day warranty. Pricing for USR-TC list only! (Damn search engines) Bundles: v92 TC1000, dual 130a power, Hiper NMC, ARC II, MultiSpan $4500 TC1000, dual 130 power, Hiper NMC, 2-Hiper ARC (128MB), 14- Hiper DSP $1000 v90 TC1000, dual 70a power, NMC v90, Hiper ARC (128MB), 4- Hiper DSP $500 TC1000, dual 70, NMC, Netserver PRI, 12- Quad Digital Modems, Dual PRI/T1 $250 TC1000, dual 70, NMC, Netserver PRI, 12- Quad Digital Modems, Dual PRI/E1 $975 TC1000, dual 70a power, NMC, Netserver PRI, 56 port- Analog/Digital $1250 Cards: MultiSpan 96 port DSP $3500 EdgeServer Pro $1250 Hiper NMC $750 Cable Upstream Receiver / Router NAC/ NIC $550 Hiper ARC (128MB/v92) $100 Hiper DSP T1 $250 Hiper DSP E1 $900 (New Condition) NMC $75 NMC V90 $250 NETSERVER PRI $150 Dual PRI/T1 $150 Dual PRI/E1 $395 Chassis's Chassis with Dual 130 $450 Chassis with dual 70A $150 130A Power set $275 130A DC Power set $250 70A Power Sets $100 70A DC Power Set $100 ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net WRCA , Inc. - 481 Wright Debow Rd. Jackson, NJ 08527

1 0

RE: [USR-TC] worms / virus
by Scott Trautman 25 Nov '03

25 Nov '03

5.3.3; I have now updated just today a couple units (that have been failing every couple of days) to 5.3.110 Dunno whether that'll make any difference at all. SMT Scott Trautman President,Owner Global Dialog Internet smt(a)gdinet.com 2049 Skaalen Road www.gdinet.com Stoughton WI 53589 608-240-4638,7fax

1 0

RE: [USR-TC] worms / virus
by Scott Trautman 25 Nov '03

25 Nov '03

I'm seeing the same thing -- and I'm having problems with ARC's that heretofor have been really stable, are rebooting every couple of days. Gee, wonder who's gonna work on a code update, eh? Scott Trautman President/Owner www.gdinet.com Global Dialog Internet 608-240-4638,7fax 2049 Skaalen Road scott(a)gdinet.com Stoughton WI 53589 Internet Service across Southern Wisconsin

2 1

bogus source address
by Cavin 25 Nov '03

25 Nov '03

Can anyone tell me where this is coming from. I have just started recieving this info from the logs of my Total Control Rack Facility "IP", Level "UNUSUAL":: ip_rcv() Received datagrams with bogus source address - 127.0.0.1 Cavin Cox Internet Systems Administrator Grand River Mutual Telephone Corp. Princeton Mo. 64673

3 2

(no subject)
by Cavin 20 Nov '03

20 Nov '03

Ok here is another one that I am starting to see. Can anyone help with this one. Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, slot:11/mod:27 TAPI_OPEN failed, retrying Nov 20 16:07:43 prcn1.176.142.167.in-addr.arpa At 16:02:55, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, slot:11/mod:31 TAPI OPEN failed Nov 20 16:07:43 prcn1.176.142.167.in-addr.arpa At 16:02:55, Facility "GWC Modem Driver", Level "UNUSUAL":: GWCMDM_AL, slot:11/mod:31 TAPI_OPEN failed, retrying

1 0