December 2001 - USR-TC - mailman.xmission.com

HiperArc ethernet port question...
by Mark Thornton 19 Dec '01

19 Dec '01

Is it possible to force the ethernet port to 10 megabit, half duplex operation? Mark Thornton San Marcos Internet, Inc 512-393-5300

1 0

FW: Bad DSP's for sale.
by Timothy C. Bohen 19 Dec '01

19 Dec '01

I have a couple bad Hiper DSP's and since I don't have a service contract I figure I'm screwed. Anybody want to buy them to try and fix them? They try and boot then just go into error. I know its not exactly a sweet deal but if anyone is interested make an offer. I hate to just throw them away. Thanks Timothy C. Bohen CMSInter.Net LLC / Crystal MicroSystems LLC =================================== web : www.cmsinter.net email : Tim(a)CMSInter.Net phone : 989.235.5100 x222 fax : 989.235.5151

1 0

Bad DSP's for sale.
by Timothy C. Bohen 19 Dec '01

19 Dec '01

I have a couple bad Hiper DSP's and since I don't have a service contract I figure I'm screwed. Anybody want to buy them to try and fix them? They try and boot then just go into error. I know its not exactly a sweet deal but if anyone is interested make an offer. I hate to just throw them away. Thanks Timothy C. Bohen CMSInter.Net LLC / Crystal MicroSystems LLC =================================== web : www.cmsinter.net email : Tim(a)CMSInter.Net phone : 989.235.5100 x222 fax : 989.235.5151

1 0

FS: Hiper DSP, Hiper ARC, Hiper NMC
by Steve Rivera -www.wrca.net 17 Dec '01

17 Dec '01

I have the following available with 30 day warranty. Hiper DSP $1250 Hiper ARC 64MB $1000 Hiper ARC 128MB $1400 (New Condition) Hiper NMC $1350 Bundle: Blue Sticker Chassis, Single70A power, Hiper NMC, Hiper ARC (64MB) and 2x Hiper DSP $5000 http://www.wrca.net Worldwide Provider of Network Hardware since 1981 Steve Rivera 732-833-2111 x102 732-433-5890 Cell

1 0

National vs Custom problem (HiperDSPs)
by Mike Tindor 17 Dec '01

17 Dec '01

In one of our specific coverage areas we are using Alltel - Their switch is a DMS-10 that does not support (or is not optioned for) DMS Custom settings. We are forced to use National. We have three PRIs in this area - Calls come in on first available open channel in the hunt. I can't seem to get our DSPs to actually communicate in an effective manner with these PRIs -- 1-3 times a week I'll find a DSP with an alarm on it. The only way I have found to reset any single one of the three Primes is to reset them all -- and in a weird fashion. Reset Backs of cards in order - slot 1, then slot 2, then slot 3 Wait 10 seconds Reset Fronts of cards in reverse order - slot 3, slot 2, slot 1 In the above fashion I can get them all up and working again so there are no alarms and they appear to be taking calls. However, as soon as Card #3 needs to take a call due to #1 and #2 being full, any number of the DSPS will alarm. But even when there were only two PRIs, we had the same problem with one or both alarming and the DSPs needing completely reset. This just doesn't happen with Custom settings - Alltel swears they can't provide me with Custom. There has to be another way to do this (certainly my configuration may be suboptimal). Trunk Settings --------------- ESF B8ZS Message Oriented DNIS priSwNI2 (these are FAS 23B+1D) Span1 Service Message support is : SENDING SERVICE MESSAGES DISABLED Can anybody give me suggestions for better management and reliability when using National settings? Thanks, Mike Tindor FIRST Internet

1 0

pap authentcation retries and pap authentication retry limit
by Andy Furnell 16 Dec '01

16 Dec '01

Hi there, Can someone point me in the right direction for findout out how to configure the following on a Total Control 1000 runnig HiperARC V5.0.9/Non-Encr: - Configure a limit on the number of attempts a remote user gets to authenticate using PAP. Ideally I want this to just be one attempt, after which time the user will be disconneted. - Configure a timeout on authentication, giving the user a short amount of time to attempt authentication, after which time they will be disconnected. I've tried looking in as much documentation as I can find, and the only thing that comes close is 'set ppp pap_retries #', but I can't seem to find this command when actually trying to enter it. Is an upgrade in order, or am I missing something patently obvious? :) I would be grateful if you could cc me in on the reply, as my subscription requests have so far been unsuccessful :) Thanks, Andy -- Andy Furnell Claranet UK Ltd. andy.furnell(a)uk.clara.net Systems Administrator 020 7903 3246 http://www.clara.net

1 0

3Com Viper ADSL system
by Mark Thornton 13 Dec '01

13 Dec '01

I have a pair of 3Com ADSL ALC cards (4 ports) and four Viper routers (version 1.x) that are about to come out of service. They are fairly rare but if anyone is interested let me know. Mark Thornton San Marcos Internet, Inc 512-393-5300

1 0

Ethernet routing on Hyper Arc
by Mark Thornton 13 Dec '01

13 Dec '01

I have a temporary requirement for a routed ethernet port and don't have a spare on my core router. Can I use the second ethernet port on the HyperArc and set up static routes for it? Mark Thornton San Marcos Internet, Inc 512-393-5300

1 0

WTB: Quad Modem Fan out cables
by Steve Rivera -www.wrca.net 13 Dec '01

13 Dec '01

Immediate need for these. Buying in any amount. email me qty available. http://www.wrca.net Worldwide Provider of Network Hardware since 1981 Steve Rivera 732-833-2111 x102 732-433-5890 Cell

1 0

FW: [USR-TC] Has anyone flashed a Hiper Arc Via Console?
by Mark Nicholas 12 Dec '01

12 Dec '01

Boot the HiperArc. When the BOOT PROM Version statement comes up, it pauses before loading the kernel. Type AT{Z}. It MUST be all CAPS. Hit enter after typing it. The following message will appear: "Begin download now.". Begin your ZModem tranfer however your terminal program does it. I use SecureCRT, and it automatically pops up with the file selection window. I believe in Hyperterminal, you would go to Transfer and Send File. You would select the file and the way to send it (X-modem, Z-modem etc,) Select Zmodem. I hope this helps. Mark Mark Nicholas, markn(a)netdoor.com CCNA 601.969.1434 Internet Doorway, Inc. http://www.netdoor.com/ > ----- Original Message ----- > From: "Steve Johnson" <linuxnut(a)sonic.net> > To: <usr-tc(a)lists.xmission.com> > Sent: Tuesday, December 11, 2001 3:25 PM > Subject: [USR-TC] Has anyone flashed a Hiper Arc Via Console? > > > > I tried to do this last night with no luck whats so ever. The > documentation > that came with the firmware explains how to flash via the consol, but it > looks like the directions are for the DSPs. and not valid for the > HiperArc. > Does anyone have any Step-by-Step instructions on how to do this? > > > -Steve > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > >

1 0