January 2001 - USR-TC - mailman.xmission.com

(usr-tc) Not sure who know's...so I thought I'd share :)
by Steve Rivera -www.wrca.net 08 Jan '01

08 Jan '01

Off the newsletter..... That plethora of information....Yeah Right! There are more file with NO NEW INFORMATION, than there is information. Anyway.... Latest Code/Documentation (Total Control Hub,Affinity) Harm2098.zip HARM Service Release v2.0.98 for Windows 10042909.pdf Release Notes for HARM Service Release (Windows v2.0.98/ HPUX v2.0.97) harm_2_0.tar HARM Service Release v2.0.98 for HP/UX 10042909.pdf Release Notes for HARM Service Release (Windows v2.0.98/ HPUX v2.0.97) Latest Service Information Updates YOUR TOTAL CONTROL SOLUTION PROVIDER WRCA.NET .........Steve Steve Rivera (VP) - 732.833.2111 x102 / CELL - 732.433.5890 - 24Hr URL: www.isp-networkhardware.com or http:///www.wrca.net Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: USR Hardware
by Steve Rivera -www.wrca.net 06 Jan '01

06 Jan '01

Happy New Years Folks... I am back in the market for Total Control Hardware. Mainly the Hiper Cards but I will consider what you have. please email list of equipment available to srivera(a)wrca.net WTB: Hiper DSP, ARC, NMC, NMC v90 enabled Dual PRI/E1 w/ E1 Nic 130A and/or 70A Power supplies Chassis with power supplies...dont need 45a chassis's...Have qty if you need. Feel free to contact me for any Total Control Hardware...New too :) Steve Rivera (VP) - 732.833.2111 x102 / CELL - 732.433.5890 - 24Hr URL: www.isp-networkhardware.com or http:///www.wrca.net Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 4

(usr-tc) routing to a subnet
by Paul Farber 04 Jan '01

04 Jan '01

hello all quick TC question... eth1 is routing for 208.149.160.0 eth2 is routing for 208.149.161.0 but subnet 208.149.160.128/255.255.255.240 is unreachable from the TC (but is in the default gw's routing table and is 'seen' by the reset of the network via static). How can I get the TC ARC to route that subnet to the gateway of 208.149.160.33? Every time I try to 'add ip route' it fails becuase the route is overlapping with a directly connected interface (eth1). If the ARC is a router, how do you set up local gw's for subnets? Thanks. Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) ISDN connection problems at 56K
by Mark Thornton 04 Jan '01

04 Jan '01

I have a community that is within our local calling scope that has always required the ISDN connections be set for 56K on the client equipment. If we set the client for 64K it would connect but no data would pass on the line (both ends of the connection think there is a valid connection, this really confuses the telco). In the last month or so I have begun having problems where the circuits will not pass data for various length periods of time, then will begin working. The routers (multiple sites) do not drop and redial the calls, they are online the whole time (I have watched both the leds and the system monitors at our end and the customer end). The telco is convinced that if there is really a connection problem the ISDN connection would immediately drop, but that is not my experience in this case. Any ideas? Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) HARM software
by Steve Cobb 04 Jan '01

04 Jan '01

Anybody want to tell me where I can get a copy of the HARM software version 1.2.6. I just upgraded my ARCs with software I had downloaded when I had a Service Contract. Now my contract has expired and the version of HARM that I have is not compatible. Any ideas. I don't want to buy a $1000 support contract for one 1.6 MB file. Thanks, Steve - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) Wierd Happenings
by Steve Cobb 02 Jan '01

02 Jan '01

I just upgraded the software on my DSP amd my ARC on a TC rack at one pop. The DSP is now at 2.1.9 and the ARC is at 4.2.32. after doing this and reseting all cards involved, my configuration was lost, i.e. my users were lost, my radius settings erased etc. Anyway, after correcting the auth and acct settings through telnet, I decided to add the users using TCM. However, I get a bunch of error messages that say "No Data Available @ xxxxxxxxx" where xxxxxxx looks like a SNMP address. I can add a user, I just can edit it, or view networks through TCM. If I add the user through telnet and then enable the user, wierd things start happening like my ARC stops responding to telnet, users can't dialin, etc. Any ideas? All help would be appreciated. Thanks, Steve Cobb Geeksnet - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) RESEND: Problems with relocating modems to a new telco
by Jim Johnson 02 Jan '01

02 Jan '01

We are relocating our modems to a new telco provider's colocation space. We grabbed an old quad chassis for testing the new colo site before the move. The quads are running 6.1.6 code and the Dual PRI card is running the 3.1.5 code. The telco vendor is running Nortel DMS-100 switches. Most of our testing is working fine, but we are having problems with some callers who can connect fine to our old POP and not at all to the new POP. I have this connection problem myself when I test the new pop from my home using a USR 56K modem. I can connect to the new pop at v.34, but not at v.90. When I remove error correction on the modem and use Hyperterm, I do see a lot of line noise. I also had the telco terminate one of the PRI's we are testing in their Cisco NAS box, and I could connect fine into that box from my home at v.90 or v.34. This is really confusing me. I was wondering if the 6.1.86 quad modem code might help, but I can't access it from the total control site even though it has no new features, just bug fixes. (This annoys me since we paid 100K for the four chassis we still own). Anyway, I was wondering if anyone could help me. Obviously, I don't want to switch thousands of users to the new pop until I understand what is happening. If anyone from 3com is montioring the list anymore, maybe you will help with a MIME attachment..... TIA, Jim - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 7