September 2000 - USR-TC - mailman.xmission.com

(usr-tc) Bad modems
by Steve Cobb 20 Nov '00

20 Nov '00

How do I soft-busy a modem from within TCM?? Thanks, Steve Cobb - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 7

(usr-tc) What platform are others moving to?
by Mark Thornton 16 Nov '00

16 Nov '00

After doing the dance with 3com over upgrading my systems to gain some additional level of stability I have come to the following conclusions. 3com wants $4640 a year for software updates only, or about $10000 for 8-5 service(?) with software updates. They also want another $4400 to purchase new v.90 keys to support my quad modems on the new hipernmc's. We talked a bit about replacing all of the quads but that would run $18,000. Pretty soon we are starting to talk about real money! The problem I have with this is why the hell does the hipernmc require a v90 key for the quad modems? Is 3com going to milk that cow until the udder bleeds? Isn't the fact that we bought the upgrade enough? We are getting real close to a break even for replacing the entire pile of trash with a new Cisco when I figure in the rebates (assuming Cisco still considers the 3com a competitive unit). Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

12 15

(usr-tc) TCS 4.0 - anyone brave enough???
by Scot Desort 12 Nov '00

12 Nov '00

Anyone using the release version of TCS4.0, in particular, the new DSP code? I see there are some improvements in v42 and Rockwell compatibility. Weird though -- there are no links to the code in the LATEST CODE section of totalservice -- you have to go to the compatibility matrix and then click on the release. -- Scot - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

12 27

(usr-tc) radius "Class" attribute
by Jeff 21 Oct '00

21 Oct '00

Does anyone know if the "Class" attribute is supported on the hiperARC or netserver? Here's the description from RFC2865: 5.25. Class Description This Attribute is available to be sent by the server to the client in an Access-Accept and SHOULD be sent unmodified by the client to the accounting server as part of the Accounting-Request packet if accounting is supported. The client MUST NOT interpret the attribute locally. PS - I tried searching the knowledgebase and the list for this answer but couldn't find it. Sorry if it's obvious and I missed it. -- Jeff Carneal - Sys Admin - Apex Internet jeff(a)apex.net http://www.apex.net (270) 442-5363 The opinions expressed above aren't really mine. They belong to someone else who also refuses to take responsibility for them. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 8

(usr-tc) "_"command
by Harry_Wang＠3com.com 11 Oct '00

11 Oct '00

Does anyone have a list of command which begin with "_", the only one I know is "_authentication". I think all these command should be very helpful for troubleshooting. Any idea is appreciated. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) The connection for call id 219549253, on if slot:14/mod:23 was dr opped for user - after successful RADIUS authentication
by Scott Trautman 06 Oct '00

06 Oct '00

Hi, I seem to have seen this before, can't recall for the life of me what this ended up meaning. Sequence on this call: Sep 13 08:53:19 lkm-ha1 At 13:49:00, Facility "Auth Facility", Level "VERBOSE":: A call, call id = 219549253, has arrived on interface slot:14/mod:23 Sep 13 08:53:38 lkm-ha1 At 13:49:19, Facility "Auth Facility", Level "COMMON":: A call is established, call id 219549253, on interface slot:14/mod:23 Sep 13 08:53:38 lkm-ha1 At 13:49:20, Facility "Auth Facility", Level "COMMON":: The connection for call id 219549253, on if slot:14/mod:23 was dropped for user UNKNOWN Doing a trace (mon ppp), I see: User Name: [Prrrrbj ] Monitoring user Prrrrbj. Decode tracing started, press ESCAPE to stop; press X for hex tracing. ....Tracing for user "Prrrrbj"; Escape to stop... Outgoing PPP Data on interface: slot:14/mod:23 PAP ACK Outgoing PPP Data on interface: slot:14/mod:23 IPCP CFG_REQ COMPR_TYPE 00 2d 0f 00 NEW_ADDRS 9c 2e b9 01 Incoming PPP Data on interface: slot:14/mod:23 LCP TERM_REQ Outgoing PPP Data on interface: slot:14/mod:23 LCP TERM_ACK It's saying to me the client is <requesting> to be terminated (suicide?) All their settings appear to be correct...definately is set to "let server assign" the IP address-- Any hints here as to what's going on? I hate to have someone rip out their dialup networking if I don't have a good reason for it. Anyone seen this before Thanks!! Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 <http://www.gdinet.com/> - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 8

(usr-tc) bad ports
by Brian Burgmeier 03 Oct '00

03 Oct '00

We have several bad ports on one of our hiper arch cards. slot:15/mod:5,9 and 10 never pick up. I've tried resetting the card but no luck. When people hit these ports they get no answer. What is the command to busy out these ports so people roll over to the next available port? Is it possible to fix these cards or do I just need to send them into 3com? Thanks- Brian slot:15/mod:1 jennifer DIALIN PPP 27-SEP-2000 23:17:40 slot:15/mod:2 pcroft DIALIN PPP 27-SEP-2000 23:43:58 slot:15/mod:3 paulb DIALIN PPP 27-SEP-2000 23:15:06 slot:15/mod:4 azred DIALIN PPP 27-SEP-2000 23:44:21 slot:15/mod:6 mcrenaud DIALIN PPP 27-SEP-2000 22:35:51 slot:15/mod:7 angelo DIALIN PPP 27-SEP-2000 23:04:51 slot:15/mod:8 maverick DIALIN PPP 27-SEP-2000 22:00:06 slot:15/mod:11 bjsjim DIALIN PPP 27-SEP-2000 23:01:27 slot:15/mod:12 bishopc DIALIN PPP 27-SEP-2000 23:55:44 slot:15/mod:13 jen DIALIN PPP 27-SEP-2000 23:58:08 slot:15/mod:14 busch DIALIN PPP 27-SEP-2000 09:54:00 slot:15/mod:15 arin DIALIN PPP 27-SEP-2000 23:21:50 slot:15/mod:16 bass398 DIALIN PPP 27-SEP-2000 23:48:21 slot:15/mod:17 cabrams DIALIN PPP 27-SEP-2000 08:09:42 slot:15/mod:18 jprice DIALIN PPP 27-SEP-2000 06:49:30 slot:15/mod:19 chucha6 DIALIN PPP 27-SEP-2000 23:00:33 slot:15/mod:20 viking DIALIN PPP 27-SEP-2000 23:33:39 slot:15/mod:21 shameem DIALIN PPP 27-SEP-2000 21:40:34 slot:15/mod:22 bbonilla DIALIN PPP 27-SEP-2000 21:53:36 slot:15/mod:23 jamesr DIALIN PPP 27-SEP-2000 23:30:25 slot:15/mod:24 numbski - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

9 10

(usr-tc) V92/V44
by Alan Martin 02 Oct '00

02 Oct '00

TO ALL: Anyone know if USR will be doing V.92/V.44 if so will It be a download to my TC boxes? Thanks Alan - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 11

(usr-tc) FS: USR/3Com Hiper Cards
by Steve Rivera -www.wrca.net 30 Sep '00

30 Sep '00

WR Communication Associates (WRCA) has the following USR Hardware available: 3- 3Com HD Chassis w/ dual 70A (Blue Stickers) $750 ea 5- USR Hiper DSP w/ nics $2900 each. 5- USR Hiper NMC w/ nics $950 each. Steve Rivera (VP) - w-732.833.2111 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 3

(usr-tc) CEO/COO shuffle
by Jeff Mcadams 28 Sep '00

28 Sep '00

Mr. Eric Benhamou has just announced that he will be stepping down as CEO of 3Com Corporation. He will be replaced with the current COO of the company, Mr. Bruce Claflin. I've heard both of these guys speak, and while both are clearly very intelligent, Mr. Claflin is far and away the more dynamic speaker. :) Having said that...I don't have much of a feel for what this change means for 3Com, and specifically for the Carrier Systems Group. -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1