August 2000 - USR-TC - mailman.xmission.com

(usr-tc) Bad modems
by Steve Cobb 20 Nov '00

20 Nov '00

How do I soft-busy a modem from within TCM?? Thanks, Steve Cobb - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 7

(usr-tc) TCS 4.0 - anyone brave enough???
by Scot Desort 12 Nov '00

12 Nov '00

Anyone using the release version of TCS4.0, in particular, the new DSP code? I see there are some improvements in v42 and Rockwell compatibility. Weird though -- there are no links to the code in the LATEST CODE section of totalservice -- you have to go to the compatibility matrix and then click on the release. -- Scot - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

12 27

(usr-tc) "_"command
by Harry_Wang＠3com.com 11 Oct '00

11 Oct '00

Does anyone have a list of command which begin with "_", the only one I know is "_authentication". I think all these command should be very helpful for troubleshooting. Any idea is appreciated. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) V92/V44
by Alan Martin 02 Oct '00

02 Oct '00

TO ALL: Anyone know if USR will be doing V.92/V.44 if so will It be a download to my TC boxes? Thanks Alan - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 11

(usr-tc) Comments on latest codes
by Cheryl Johnson 18 Sep '00

18 Sep '00

Before attempting to upgrade our USR chassis I thought it may be wise to ask the list of their thoughts first. Is anyone running the following software releases? If so, any input on stability or any known problems would be greatly appreciated. NMC 7.1.8 ARC 5.0.9 DSP 2.1.9 -Cheryl Network Administrator SEI Communications Data and Network Services - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

7 11

(usr-tc) FS: USR Hiper Hardware
by Steve Rivera -www.wrca.net 07 Sep '00

07 Sep '00

WR Communication Associates (WRCA) has the following USR hardware available: 2- Hiper DSP w/ nic $3000 3- Hiper NMC w/ nic $900 (Factory Warranty) 1- EdgeServer Card w/ SCSI-2 NIC $1100 Part# 69-001160-01 R:5 Part# 69-001410-00 R:2 1- Hiper DSP NIC $550 (backplane card only) 1- Hiper ARC NIC $500 (backplane card only) 18- Quad Analog Modems w/ analog nic (2 card) $250 64- Quad Digital Modems $225 I also have huge inventory of TC cards, chassis, power supplies..ect 2- Netserver 16 v34 $750...sold 1- Netserver 8 v34 $500 3- Netserver 8I $750 6- MP16 v34 $650 2- MP8 v34 $500 1- MP8I $900 2- MMP16 v34 $850 Steve Rivera (VP) - w-732-833-2111 / c-732-433-5890 24Hr www.isp-networkhardware.com ICQ# 75229638 Email: srivera(a)wrca.net Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,Verilink, IBM,Motorola,UDS,Codex,ATT,Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom, APC Batteries & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) bad modems in hiper dsp
by Blake Fithen 31 Aug '00

31 Aug '00

2.0.51 fixed that for us. It was quite a relief blake > -----Original Message----- > From: Jim Baxter [SMTP:jim@atconnex.net] > Sent: Thursday, August 31, 2000 8:25 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) bad modems in hiper dsp > > Mike., > > Thanks for the info. I am running DSP code 2.0.81 and yes, the modems > fail > in pairs, mod:1 and mod:2 do not accept calls properly on one of my DSPs, > and mod:13 and mod:14 do not work on another. > > Jim Baxter > Systems Administration > AtConnex Networks > jim(a)atconnex.net > > > ----- Original Message ----- > From: <mike(a)otherland.dyndns.org> > To: <usr-tc(a)lists.xmission.com> > Sent: Wednesday, August 30, 2000 11:00 PM > Subject: Re: (usr-tc) bad modems in hiper dsp > > > > On Wed, 30 Aug 2000, Jim Baxter wrote: > > > > > I have come accross several bad modems on my hiper dsps. I logged > into > the > > > CLI on the hiper arc, and disabled them using > > > > > > HiPer>> disable interface slot:xx/mod:xx > > > > > > I would assume this would work fine, however now when all the other > modems > > > on the card fill up, my customers receive fast busy signals. This > should > > > not be the case as our phone lines are configured such that all calls > should > > > roll over onto the second PRI once the first one is full. Has anyone > > > experienced this before? Is there a way that I can busy out a modem > on > a > > > DSP so that the incoming calls will still roll onto the next pri? > > > > You have assumed wrong.. This stops the HARC from using the interface > but > > not the DSP from accepting a call on them. You should try setting the > > DS0s Local Out Of Service (L00S). Then you should get the desired effect > > if your spans are provisioned correctly. > > > > I have never seen bad "modems" on a hiper DSP card. There are only 12 > DSPs > > each with 2 virtual modems. Do you see failed modems in pairs, if not > > then its not a hardware problem. What code are you running? > > > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) bad modems in hiper dsp
by Jim Baxter 31 Aug '00

31 Aug '00

I have come accross several bad modems on my hiper dsps. I logged into the CLI on the hiper arc, and disabled them using HiPer>> disable interface slot:xx/mod:xx I would assume this would work fine, however now when all the other modems on the card fill up, my customers receive fast busy signals. This should not be the case as our phone lines are configured such that all calls should roll over onto the second PRI once the first one is full. Has anyone experienced this before? Is there a way that I can busy out a modem on a DSP so that the incoming calls will still roll onto the next pri? Thanks Jim Baxter Systems Administration AtConnex Networks jim(a)atconnex.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) dead hiper dsp
by Kalev Nurklik 31 Aug '00

31 Aug '00

Got a HDSP here with solid red for 'Run/Fail'. There is also fourth LED amber on utilization bar or whatever it's called counting from down to up. Nothing else is lit. Anybody has a clue what that means? I have removed and re-seated both NAC and NIC and in correct order. That means NIC first then NAC - no help. I haven't checked the console yet but thought to turn to the list before I get to that. I think I remember from somewhere that the utilization LEDs represent the error that has occured - is there a table describing these? Would it help to re-flash the card? Regards, __________________________________ Kalev Nurklik Delfi Online Pa"rnu mnt. 158, 11317 Tallinn, Estonia Tel: +372 6501709 Fax: +372 6501708 E-mail: k.nurklik(a)delfi.ee http://online.delfi.ee - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

Re: (usr-tc) bad modems in hiper dsp
by K Mitchell 31 Aug '00

31 Aug '00

At 02:53 PM 8/30/00 -0400, Jim Baxter wrote: >I have come accross several bad modems on my hiper dsps. I logged into the >CLI on the hiper arc, and disabled them using > >HiPer>> disable interface slot:xx/mod:xx > >I would assume this would work fine, however now when all the other modems >on the card fill up, my customers receive fast busy signals. This should >not be the case as our phone lines are configured such that all calls should >roll over onto the second PRI once the first one is full. Has anyone >experienced this before? Is there a way that I can busy out a modem on a >DSP so that the incoming calls will still roll onto the next pri? Soft busy will do this. Through TCM, highlight the top lights of the card, then go to configure...actions/commands. Select the "Timeslot" radio button and highlight the modem numbers you want to busy. Then use the "software/soft busy out" command. I'm not aware of a way to do this via the ARC console. The way I do it is to soft busy only bad modems through heavy use periods, then soft busy the entire card at the end of the evening(soft busy will not knock off users, but will prevent any relogons after the modem is vacated). Thus, by morning the card will be empty and I can reset the card. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0