April 2000 - USR-TC - mailman.xmission.com

Re: (usr-tc) OFfice Connect ISDN routers
by Sonny Ruiz 21 Apr '00

21 Apr '00

Not sure which router your are referring, but if it's the OfficeConnect LAN Modem, just make sure that you have the latest revision of software (download from http://www.remoteaccess.3com.com/support/docs/lanmodem/documentation/3c892/…) I've installed several of these and had problems in the earlier versions when the OCLM will stop sending packets. Haven't seen that problem with version 5.3.1. Sonny >From: "Lon R. Stockton, Jr." <lon(a)moonstar.com> >Reply-To: usr-tc(a)lists.xmission.com >To: usr-tc(a)lists.xmission.com >CC: USRobotics TC Mailing List <usr-tc(a)xmission.com> >Subject: Re: (usr-tc) OFfice Connect ISDN routers >Date: Tue, 18 Apr 2000 17:54:09 -0400 (EDT) > > >On Tue, 18 Apr 2000, Brian wrote: > > > Does anyone know of any issues with the 3Com Office Connect series ISDN > > routers and the Total Control? > >Not aware of any; they're our recommended equipment for so/ho >applications (if forseeable growth is less than 20ish machines >connected). Basically, it's what we tell everyone to buy if a Cisco >804 is overkill for their application. > >Haven't seen any problems. I'd suggest doing the manual reset on >the thing (where you plug in only a standard telephone into the unit >and punch a code in with the phone's keypad)...and then just set the >entire unit up again. I have to do that to the one we use ourselves >every time I move it to a different location (phone number). > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) modem not available
by David Hamilton 20 Apr '00

20 Apr '00

I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get: SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) Does anyone know how to make these "modems available"? David Hamilton Network Engineer Voyager.Net david.hamilton(a)voyager.net Phone:517-324-5884 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) USR VIPER cards DSL For Sale
by Steve Rivera 20 Apr '00

20 Apr '00

I have 6 viper cards. The ALC cards are Dual ports so each card will do 2 connections in only one slot I have 3 of them. Available now. Looking for offers Worldwide Provider of Network Hardware Since 1981. Steve Rivera - v-732-833-2111 / 732-433-5890 24Hr Email Page 7324335890(a)page.nextel.com (start message with YOUR email address) WAN ACCESS SPECIALIST--- http://www.wrca.net or http://www.ISP-NetworkHardware.com Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,BayNetworks, Verilink,IBM,Motorola,UDS,Codex,ATT/Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) modem not available
by Mini Computer Room T-5 20 Apr '00

20 Apr '00

if you go to the span level on the dual t1 card pick the ds0 that has the modem in trbl command off-hook then on-hook this should fix trbl it's a bug with quads hardware reset on the quad card will also fix trbl -----Original Message----- From: David Hamilton <hamilt99(a)pilot.msu.edu> To: Usr-Tc(a)Lists.Xmission.Com <usr-tc(a)lists.xmission.com> Date: Wednesday, April 19, 2000 8:01 PM Subject: (usr-tc) modem not available >I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a >"Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem >Connected to DS0" on the span for the first t1 I get: > >SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO >01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) >01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) >01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) >01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) > >Does anyone know how to make these "modems available"? > >David Hamilton >Network Engineer >Voyager.Net >david.hamilton(a)voyager.net >Phone:517-324-5884 > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) VOIP Support ?
by jeff.binkley＠asacomp.com 20 Apr '00

20 Apr '00

Does anyone know when VoIP support is going to be available in the TC ? I'd like to be able to take analog calls in on the HiPer DSPs and based upon the DNIS number, turn it into an IP stream to be terminated on Cisco router analog ports. Thanks, Jeff Binkley ASA Network Computing CMPQwk 1.42 9999 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Suggested Firmware
by Blake Fithen 19 Apr '00

19 Apr '00

You do know about the cut-and-paste feature right? Change the value, "ctrl-c", click to the left of where you entered the value - on the part that says "Carrier loss detect delay", "ctrl-v", Click set/ok. That should change it across all the DSP's on that chassis. Just making sure. blake > -----Original Message----- > From: Tom Swenson [mailto:tom@netconx.net] > Sent: Wednesday, April 19, 2000 3:12 PM > To: usr-tc(a)lists.xmission.com > Subject: RE: (usr-tc) Suggested Firmware > > > It didn't appear to be, but I never really have known. As I'm > going thru > my dsp's and changing settings, it appears after I hit set, > then if I hit > get, the new value comes back. Thanks for responding. > > Tom Swenson > NetConX - Internet Access - Web Design - Client Managed Web Database > Applications > tom(a)netconx.net > http://www.netconx.net > (515) 421-4170 - Voice (515) 423-3351 - FAX > > > *********** REPLY SEPARATOR *********** > > On 4/19/2000 at 3:07 PM Blake Fithen wrote: > > >I don't think rebooting is necessary. > > > >blake > > > >> -----Original Message----- > >> From: Tom Swenson [mailto:tom@netconx.net] > >> Sent: Wednesday, April 19, 2000 2:59 PM > >> To: usr-tc(a)lists.xmission.com > >> Subject: RE: (usr-tc) Suggested Firmware > >> > >> > >> Do I need to reset my DSP after changing this? I'm still > fairly new to > >> USR's. I found the setting, mine was at 7 by default. I don't > >> always know > >> what changes are instantaneous and which ones need rebooting for. > >> > >> Tom Swenson > >> NetConX - Internet Access - Web Design - Client Managed > Web Database > >> Applications > >> tom(a)netconx.net > >> http://www.netconx.net > >> (515) 421-4170 - Voice (515) 423-3351 - FAX > >> > >> > >> *********** REPLY SEPARATOR *********** > >> > >> On 4/17/2000 at 2:58 PM Blake Fithen wrote: > >> > >> >Don't forget to set the "Carrier Loss Detect Delay" to > >> >around 20 or so. That helped us quite a bit on the > >> >disconnects/failed handshakes. > >> > > >> >blake > >> > > >> >> -----Original Message----- > >> >> From: Mark S - Squid Manager [mailto:squid@greenapple.com] > >> >> Sent: Monday, April 17, 2000 2:37 PM > >> >> To: usr-tc(a)lists.xmission.com > >> >> Subject: Re: (usr-tc) Suggested Firmware > >> >> > >> >> > >> >> It works, but we have noticed higher disconnects and failed > >> >> handshakes with > >> >> these two.......2.0.51 and 0.53 and above works great........ > >> >> > >> >> Mark > >> >> > >> >> ----- Original Message ----- > >> >> From: "K Mitchell" <mitch(a)keyconn.net> > >> >> To: <usr-tc(a)lists.xmission.com> > >> >> Sent: Monday, April 17, 2000 1:52 PM > >> >> Subject: Re: (usr-tc) Suggested Firmware > >> >> > >> >> > >> >> > At 01:36 PM 4/17/00 -0400, Mike Andrews wrote: > >> >> > >No, you should be running 2.0.51 on the DSP's for that... > >> >> > > >> >> > How does 2.0.51 work with 0.49 hardware? > >> >> > > >> >> > > >> >> > -- > >> >> > Kirk Mitchell-General Manager mitch(a)keyconn.net > >> >> > Keystone Connect Unlock Your World > >> >> > Altoona, PA 814-941-5000 http://www.keyconn.net > >> >> > > >> >> > > >> >> > - > >> >> > To unsubscribe to usr-tc, send an email to > >> "majordomo(a)xmission.com" > >> >> > with "unsubscribe usr-tc" in the body of the message. > >> >> > For information on digests or retrieving files and old > >> >> messages send > >> >> > "help" to the same address. Do not use quotes in > your message. > >> >> > > >> >> > >> >> > >> >> - > >> >> To unsubscribe to usr-tc, send an email to > >> "majordomo(a)xmission.com" > >> >> with "unsubscribe usr-tc" in the body of the message. > >> >> For information on digests or retrieving files and old > >> messages send > >> >> "help" to the same address. Do not use quotes in your message. > >> >> > >> > > >> >- > >> > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > >> > with "unsubscribe usr-tc" in the body of the message. > >> > For information on digests or retrieving files and old > messages send > >> > "help" to the same address. Do not use quotes in your message. > >> > >> > >> > >> > >> - > >> To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > >> with "unsubscribe usr-tc" in the body of the message. > >> For information on digests or retrieving files and old > messages send > >> "help" to the same address. Do not use quotes in your message. > >> > > > >- > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

Re: (usr-tc) Anybody use a MAX 6048?
by Rob Servis 19 Apr '00

19 Apr '00

Easy to setup (once you do a few). Config can be TFTP'd up to/from a server easily. Good, clean VT100 monitoring interface. 6048 comes with 48 modem ports, but 4 T1/PRI ports enabled. Ascend user's list: ascend-users-request(a)bungi.com -----Original Message----- From: Scot Desort <scot(a)njaccess.net> To: usr-tc(a)lists.xmission.com <usr-tc(a)lists.xmission.com> Date: Thursday, April 06, 2000 1:30 PM Subject: (usr-tc) Anybody use a MAX 6048? >We are looking to add alternative equipment to compliment our 3COM TC gear. >We are looking at the Max 6048. Anybody use these boxes? Any opinion, good >or bad, about their performance, features, compatibility, etc? I know some >folks here use TNT's, but they're just not in our budget. > > >-- >Scot > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Modems ?
by K Reid 19 Apr '00

19 Apr '00

3com isn't out of the modem business they're just rolling the desktop and PCMCIA modems to a new company that will sell them as USR. Same modems but it's USR again. >From: Marius Strom <marius(a)alpha1.net> >Reply-To: usr-tc(a)lists.xmission.com >To: usr-tc(a)lists.xmission.com >Subject: Re: (usr-tc) Modems ? >Date: Mon, 17 Apr 2000 10:37:12 -0500 (CDT) > >They've gotta get rid of the existing product base, or, the same people >are still managing their screwy business plan. > >"Hmm, let's see, we'll market this, but we'll stop producing them! Yeah!" > >-- >Marius Strom <marius(a)alpha1.net> >Professional Geek/Unix System Administrator >Alpha1 Internet <http://www.alpha1.net> >http://www.marius.org/marius.pgp 0x42C74CBA > >In theory, there is no difference between theory and practice... >...In practice, there is a big difference. > >On Mon, 17 Apr 2000, Mark Thornton wrote: > > > If 3Com is getting out of the modem business why does a 3Com rep keep > > hounding me every three days to participate in a modem sales referal > > program? > > > > Mark Thornton > > San Marcos Internet, Inc. > > 512-393-5300 > > > > > > ----- Original Message ----- > > From: Jeff Binkley <jeff.binkley(a)asacomp.com> > > To: <usr-tc(a)lists.xmission.com> > > Sent: Monday, April 17, 2000 11:15 AM > > Subject: (usr-tc) Modems ? > > > > > > > Folks, > > > > > > Now that 3Com is getting out of the modem business, what is everyone >going > > to > > > recommend for customers to use ? > > > > > > > > > Jeff Binkley > > > ASA Network Computing > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Suggested Firmware
by Blake Fithen 19 Apr '00

19 Apr '00

I don't think rebooting is necessary. blake > -----Original Message----- > From: Tom Swenson [mailto:tom@netconx.net] > Sent: Wednesday, April 19, 2000 2:59 PM > To: usr-tc(a)lists.xmission.com > Subject: RE: (usr-tc) Suggested Firmware > > > Do I need to reset my DSP after changing this? I'm still fairly new to > USR's. I found the setting, mine was at 7 by default. I don't > always know > what changes are instantaneous and which ones need rebooting for. > > Tom Swenson > NetConX - Internet Access - Web Design - Client Managed Web Database > Applications > tom(a)netconx.net > http://www.netconx.net > (515) 421-4170 - Voice (515) 423-3351 - FAX > > > *********** REPLY SEPARATOR *********** > > On 4/17/2000 at 2:58 PM Blake Fithen wrote: > > >Don't forget to set the "Carrier Loss Detect Delay" to > >around 20 or so. That helped us quite a bit on the > >disconnects/failed handshakes. > > > >blake > > > >> -----Original Message----- > >> From: Mark S - Squid Manager [mailto:squid@greenapple.com] > >> Sent: Monday, April 17, 2000 2:37 PM > >> To: usr-tc(a)lists.xmission.com > >> Subject: Re: (usr-tc) Suggested Firmware > >> > >> > >> It works, but we have noticed higher disconnects and failed > >> handshakes with > >> these two.......2.0.51 and 0.53 and above works great........ > >> > >> Mark > >> > >> ----- Original Message ----- > >> From: "K Mitchell" <mitch(a)keyconn.net> > >> To: <usr-tc(a)lists.xmission.com> > >> Sent: Monday, April 17, 2000 1:52 PM > >> Subject: Re: (usr-tc) Suggested Firmware > >> > >> > >> > At 01:36 PM 4/17/00 -0400, Mike Andrews wrote: > >> > >No, you should be running 2.0.51 on the DSP's for that... > >> > > >> > How does 2.0.51 work with 0.49 hardware? > >> > > >> > > >> > -- > >> > Kirk Mitchell-General Manager mitch(a)keyconn.net > >> > Keystone Connect Unlock Your World > >> > Altoona, PA 814-941-5000 http://www.keyconn.net > >> > > >> > > >> > - > >> > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > >> > with "unsubscribe usr-tc" in the body of the message. > >> > For information on digests or retrieving files and old > >> messages send > >> > "help" to the same address. Do not use quotes in your message. > >> > > >> > >> > >> - > >> To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > >> with "unsubscribe usr-tc" in the body of the message. > >> For information on digests or retrieving files and old > messages send > >> "help" to the same address. Do not use quotes in your message. > >> > > > >- > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Suggested Firmware
by Blake Fithen 19 Apr '00

19 Apr '00

Don't forget to set the "Carrier Loss Detect Delay" to around 20 or so. That helped us quite a bit on the disconnects/failed handshakes. blake > -----Original Message----- > From: Mark S - Squid Manager [mailto:squid@greenapple.com] > Sent: Monday, April 17, 2000 2:37 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Suggested Firmware > > > It works, but we have noticed higher disconnects and failed > handshakes with > these two.......2.0.51 and 0.53 and above works great........ > > Mark > > ----- Original Message ----- > From: "K Mitchell" <mitch(a)keyconn.net> > To: <usr-tc(a)lists.xmission.com> > Sent: Monday, April 17, 2000 1:52 PM > Subject: Re: (usr-tc) Suggested Firmware > > > > At 01:36 PM 4/17/00 -0400, Mike Andrews wrote: > > >No, you should be running 2.0.51 on the DSP's for that... > > > > How does 2.0.51 work with 0.49 hardware? > > > > > > -- > > Kirk Mitchell-General Manager mitch(a)keyconn.net > > Keystone Connect Unlock Your World > > Altoona, PA 814-941-5000 http://www.keyconn.net > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2